I. Can the roller skating shoes protectors be washed?
Because roller skating can exercise people’s balance ability well, it is the most popular sport nowadays. When it comes to roller skating, roller skates are an essential item, but many parents have questions about whether roller skates can be washed when their children wear roller skates. Let’s take a look.
Roller skating shoes, like knee pads and elbow pads, are generally made of elastic cloth, which is easy to absorb sweat, and is more likely to be stained with dirt when falling, so it must be cleaned regularly. Hygienic and healthy!
Stretch cloth, is a kind of fabric with elasticity. Rib cloth, also known as elastic cloth, is a knitted fabric with a rib structure. Because the coils are interlocked with each other, the yarn will slip when pulled by external force, so the rib cloth has greater elasticity and can be cleaned.
Second, How to clean roller skates
The previous article has simply answered the question of whether skates can be washed, so in daily life, how to clean roller skates?
The roller skating protective gear
 is mainly to wash off sweat stains. It can be washed with a brush, washed with soap powder, or it can be washed in water, and then dried in the sun.
Third, how to simply clean and maintain roller skates
1. First, use old towels or waste cloth to remove the large dust on the surface of roller skates Dirt particles are wiped away.
2. Next, use a T-shaped screwdriver to unscrew the wheels of the roller skates.
3. Then, use the old towel or waste cloth to carefully wipe off the dust and dirt on the inner wall of the knife holder and the two sides of the bearing in the wheel.
4. The dust and dirt in some small crevices cannot be removed with towels, etc. At this time, an old toothbrush should be used. Mainly for the bearing, because the bristles of the toothbrush are relatively small, it can better remove the dust and dirt in it.
5. After the cleaning work is completed, it is time for maintenance. Wet the bearing with an appropriate amount of lubricating oil and let it enter through the bearing gap to maintain the bearing.
6. Finally, re-screw the removed wheel with a T-shaped screwdriver according to the original position. Note that the wheel does not need to be tightened too much! At this point, the simple maintenance and cleaning of the roller skates is completed.