1. How to install the outdoor folding table
A family can carry an outdoor portable folding table for outdoor camping, and use the outdoor folding table to play cards, drink tea, eat barbecue and other activities It is very convenient. Some outdoor folding tables are spare parts and need to be assembled by themselves. So how to install outdoor folding tables?
1. Preparation before assembly: Preparation tools: Phillips or flat-blade screwdriver, wrench, pencil, it is recommended to use a pistol electric drill. Insert the circular fixed head into the punched hole and expose the crossed side of the connector.
2. Screw the connecting rod into the expansion plug that has been embedded in the plate. It is best not to screw it to the end. Use the No. 14 wrench to install the universal wheel into the moving door marked on the drawing. Adjust the height later.
3. Screw the handle into the punched handle hole, pay attention to the front and back of the door panel, the side without the hinge hole is the front, the handle screw may be too long, so the hardware package is added. 2 circular spacers with holes in the center, place this spacer between the screw and the door panel.
4. Only when it leaves the factory The hinge screw holes have been pre-drilled on the moving door and door panel in advance, and the hinge holes of the two side panels and the top panel have not been pre-drilled. This is to make it easier for buyers to install with small errors. Buyers have to screw up a few more screws. The screws that fix the hinges are self-tapping, which can be easily screwed in with a screwdriver even if there is no pre-drilled hole.
5. Turn the folding table upside down, with the top plate touching the ground, and connect the No. 2 tabletop and No. 1 top plate together with hinges. Move the door panel to support the table top, insert the pin head into the hole on the back of the table top, draw the position with a pencil on the moving door and fix the pin. The pin hole is not pre-drilled.
6. When assembling the folding table, a felt cloth or cardboard box should be laid on the ground to avoid scratches on the table. When installing the hinge, because the surface of the board is relatively hard, it is difficult to screw in the screws. You can press the screws first, and tap the screws with a hammer a few times, so that the board leaves a small hole that is recessed, so that it is easy to screw in.
The above is the installation method of the outdoor folding table. The installation method of different outdoor folding tables may be different, but the installation manual will be attached to the general purchase, and you can install it according to the manual.
Second, what are the precautions for installing an outdoor folding table
1. Do not install the outdoor folding table you bought, but read the installation instructions first , Install it according to the manual, avoid installing it by yourself, otherwise it will be troublesome to install it wrongly or install it backwards.
2. Before installation, you should carefully check whether the spare parts and installation tools are complete.
3. When installing, screw, connecting rod and other parts that need to be screwed must be screwed in place, so as to be firm.
4. After installation, test it to see how the load-bearing capacity is, whether it is strong, and it is inconvenient to fold.