What are the classifications of baby swimming rings? How to use baby swimming rings?

Classification of baby swimming rings

Classification by material

< strong>1. Plastic baby swimming ring

This type of product is made of plastic, most of which are single airbags, and the design is almost the same as that of adult products. The advantages are that it is relatively simple, easy to make, and the price is relatively affordable.

2. PVC baby swimming ring

The PVC material is relatively new, and this material is relatively new in terms of gloss, feel, comfort, and firmness Well, the leak-proof effect is also good. Most of the products made of PVC are equipped with double airbags or four airbags, which have better safety performance.

Classified by the number of airbags

1, single airbag baby swimming ring

This kind of swimming ring It is an overall design and production, and there is no air nozzle for inflation. A fully inflated swimming ring is less flexible, and a baby’s body is very soft and tender, so this swimming ring may not be particularly comfortable for a baby.

2.Double airbag baby swimming ring

The double airbag baby swimming ring is equipped with two airbags and double buckles, so that the baby can learn to swim Double insurance is provided. Most of them are double airbag design, each airbag has its own air nozzle, pay attention to adjust the comfort when inflating, not too much or too little. After putting the swimming ring on the baby, the buckle should be fastened, so that in the critical situation of one of the airbags, the buoyancy of the other airbag can be used to support the baby, so as to buy more time for mothers to rescue the baby. Make sure your baby’s life is safe.

3. Four-airbag baby swimming ring

With the original intention of ensuring the safety of the baby, the double-airbag swimming ring is designed and manufactured by dividing it into two. When using this kind of swimming ring, if 3 of the 4 airbags leak, the user will also carry the baby out of the water within a safe time range, and the possibility of problems with the 3 airbags at the same time is extremely small, so This swimming ring is completely for the safety of the baby.

However, this four-bag swim ring also has disadvantages. First, the inflation problem. When inflating each airbag, it is necessary to consider that the gas in the pro-bags on both sides should be equal to ensure the balance of the baby, which increases the difficulty of inflation. Second, it is easy to be scrapped. As long as one of the four airbags is damaged, the remaining three are useless, and the entire swimming ring is directly scrapped, which increases the damage rate of the swimming ring.

By location Classification

1. Neck Ring

This product can be used when the baby can’t raise his head when he is just born. The height of the water in the baby pool is similar to the height of the neck ring worn by the baby.

2. Underarm circle

Babies are more and more interested in swimming as they grow up and need to learn to swim further. Augmented they will hate the feeling of being restrained by the neck, and yearn for a wider field of view, and the water depth of the baby pool is not enough for the baby to continue swimming. If you want to use the original swimming pool, you can only change the swimming height of the baby or the water depth of the swimming pool. Move the swimming ring down and put it on the baby’s armpit, which can increase the swimming height of the baby, thus creating an underarm ring.

By shape

1, round baby swimming ring

round swimming ring is The most primitive style is also the style of most swimming rings. The round shape is not only for beautiful appearance, but also to improve the balance of the swimming ring, so that the baby can swim freely and safely and comfortably.

2. Star-shaped baby swimming ring

The star-shaped swimming ring is designed based on the circular swimming ring, the difference is the outer circumference of this swimming ring It has an arc, which is more advanced than a circular swimming ring, and has a cute appearance. But there are also disadvantages. The original circular swimming ring is dug into a star shape, the space for inflation is reduced, and the buoyancy is weakened, so that most of the swimming ring sinks, thereby increasing the surface resistance, which makes it difficult for the baby to swim. increase.

Characteristics of professional baby swimming rings

1. The skin of infants and young children is delicate, and the product material must meet the standards of medical equipment to ensure safety. The selection of materials must meet scientific standards and pay attention to protecting the baby’s skin.

2. The appearance is smooth to prevent the baby from being stabbed.

3. Choose soft-tone products, which will not cause visual stimulation to the baby and avoid affecting their visual development.

4. Install multiple airbags, four is better, and each airbag is equipped with an inflatable nozzle to ensure that the buoyancy of other intact airbags can make the baby lift out of the water when a certain airbag is damaged, preventing safety hidden danger.

5. In order to protect the baby’s jaw, the swimming ring should have a unique jaw groove design.

6. Movable magic buckle: The buckles at the upper and lower ends are used to fasten the baby’s swimming ring to ensure the safety of the baby when swimming. The size adjusts to your baby’s neck circumference, allowing him to swim comfortably and safely.

7. Anti-leakage valve: The baby swimming ring adopts a special anti-leakage design. Even if the valve is not properly closed, the air leakage will be slow, so as to buy enough time for parents to rescue the baby.

How to use a baby swimming ring

1. Inflation

In reverse order , first pull out the air nozzle inside the airbag, open the cover, and then insert the air nozzle mouth against the air nozzle, and press firmly. Then pinch it tightly with two fingers, about 40 percent of the gas is filled, and then use the same method to inflate the front airbag, about 50 percent, to ensure that both sides are filled with 90 percent of the gas. During this period, pay attention to slowly filling the gas, only about 60 percent of the gas is required when using it. (Pinch and press with your fingers, and the thumb surface sinks into one finger or so)

2. Adjustment

First, adjust the airbags on both sides to balance, that is, the gas in the airbags on both sides The amount is the same, so that the inner ring is round, then install the buckle strap and install the buckle. Before use, carry out safety inspection, pull the buckle at different positions to see if it is tight, and there should be no gap between the airbags on both sides. If there is a gap, the buckle can be shortened.

3. Deflate

(1) Deflate the airbags on both sides of the swimming ring in reverse order.

(2) Open the valve cover and pull out the valve from the airbag. Be careful not to use too much force when pulling the valve, but do it slowly.

(3) There are two methods at this time, one is to control the root of the gas nozzle to prevent the gas from leaking out too quickly; Gently press the bladder to allow the gas to escape slowly.

Precautions for using baby swimming rings

1. The buckle strap should not be pulled too much to prevent damage, and the socket should not be removed at will, and must be installed correctly , to prevent falling off.

2. When using air needles, do not use too much force or insert too deep to prevent damage to the leak-proof valve of the swimming ring or even piercing the swimming ring.

3. If you feel that the inflation is too laborious or unable to inflate the gas, it may be that the leak-proof sheet is closed too tightly. You can pinch the root of the inflation nozzle with your hand to open the leak-proof sheet and then inflate.

4. It is strictly forbidden to place the swimming ring near high temperature to prevent material problems. After use, wipe it dry and store in a dry and cool place.

5. If the swimming ring is equipped with a thermometer, please do not put the thermometer in hot water of 50 degrees and above, to avoid the occurrence of mercury in the measuring tube does not fall back, resulting in errors in the visual value or damage to the thermometer. question.

Declare: The above content comes from the program system index or shared by netizens, and is for your reference only. It does not represent the research views of this website. Please pay attention to the authenticity and authority of the content source. sex.