The industrial dehumidifier needs to be equipped with an evaporator to achieve good results. In actual use, it is found that the evaporator of the dehumidifier is frosted. What is going on? What adverse consequences will there be?
After a comprehensive inspection, it was found that there are several possible reasons for the frosting of the evaporator of the dehumidifier. One is that the dehumidification system lacks fluorine or the filling amount is not enough. It is mainly known if the thin tube of the evaporator is frosted. . Another possibility is that the equipment and filters are not clean enough, so that the evaporation is not comprehensive and complete, so that the cold energy cannot be released. After a long period of accumulation, the obvious performance is frosting.
Another situation, when the fan speed is too low, so that the cooling capacity cannot be pumped out, the same phenomenon will occur. The root cause of the problem that the wind speed is too low may also be caused by the dirty fan. It can be seen that if the equipment is to operate normally, the cleaning and maintenance work must not be sloppy.