When the chiller is running, it is often accompanied by machine failures, which causes a headache for the operators. So, what exactly caused the failure? How can we solve these failures? Generally, in the process of using the chiller, the faults we will encounter are: the temperature of the chiller oil is too high, the chiller suddenly cuts off the water, and the chiller oil pressure is too low. In order to help you make better use of the chiller, I specifically checked the relevant information for the failure of the chiller, and put forward corresponding solutions, as follows.
1. The oil temperature is too high
1. Reason: The reason for the high oil temperature is more complicated, it may be because the coolant used has no cooling capacity, or it may be caused by the The heat generated by the friction of the parts during operation may also be caused by the insufficient supply of the cooling filter;
2. Countermeasures: For the above reasons, the oil temperature is too high In case of high oil temperature, the countermeasure we adopted is to replace the cooling oil and repair the parts in time to eliminate all the factors that cause the oil temperature to increase; >What is the reason for the water cutoff of the chiller? It is mainly caused by insufficient supply of cold water. Once the supply of cold water is insufficient, it will easily lead to machine downtime and affect production efficiency; The water supply is good;
Three, the oil pressure is too low
1. Reason: There are many reasons for the low oil pressure of the chiller, one may be the failure of the oil pressure gauge The oil pressure cannot be accurately measured, and it may be caused by the oil loss too fast;
2. Countermeasures: We need to replace the oil filter in time to make it The oil flow is controlled within a certain range.
Do you understand? Hope my explanation can help you.