The good running state of the industrial chiller is inseparable from the performance of its components, and the role of the centrifuge among these components is very obvious. In order to adjust the centrifuge to the best working condition, we have done a lot of work, and the results obtained are very satisfactory. Then let’s focus on the adjustment of the centrifuge in the chiller.
When adjusting the centrifuge in an industrial chiller, be sure to check the correctness of the wiring, the matching of parameters such as voltage, current, and load, and so on. At the same time, pay attention to the current of the chiller under full pressure. If the power supply capacity is insufficient, it can be adjusted by reducing the voltage.
In the process of commissioning, it is best to close the valve on the inlet or outlet pipeline of the centrifuge, and gradually open the valve after operation until the required working condition is reached. Under these kinds of guarantees, the centrifuge can obtain the best operating state and promote the industrial chiller to achieve the expected use effect.
Shopping Cart