Common sense of massager use and maintenance
1. Choose different types of massagers according to different massage functions. According to different massage parts, choose the corresponding massage head to install on the massager.
2. Check whether the wires, plugs, shells, etc. of the massager are in good condition, and whether the operating voltage is consistent with the city voltage.
3. Select the “strong” and “weak” positions of the switch according to your needs. When starting to use, you can first adjust the switch to the “weak” position. After massaging for a while, if there is no discomfort, you can Set it to “Strong”.
4. The time for each massage is generally up to 30min. If you feel unwell during or after the massage, you should stop using it.
5. During the massage process, if there are abnormal phenomena such as the vibrator does not move, the vibration is loose or the sound is too loud, you should immediately turn off the switch, unplug the power plug, check carefully, and remove the fault. Can be used again.
6. During operation, the arm of the massager will vibrate, which is a normal phenomenon. If you feel uncomfortable, wrap some soft objects such as sponges to reduce arm vibration.
7. It is not advisable to use the massager with AC voltage of 220V when bathing or in a humid place, and do not let water splash on the massager, which may cause electric shock to rabbits.
8. Patients with heart disease, mental illness or other serious diseases are generally not suitable to use the massager by themselves, and should be used according to the doctor’s advice with the help of others.
9. If you sweat a lot during massage, use a towel to dry before massaging, which is safe and effective.
10. The distance between the movable iron core and the fixed iron core of the electromagnetic massager has a great influence on the strength of vibration. The weaker; on the contrary, the smaller the gap, the stronger the vibration. Usually the strength of the massager has been adjusted at the factory, and the general user does not need to readjust it. However, due to the different needs and feelings of each person, appropriate adjustments can still be made if necessary. The adjustment steps are as follows: Open the plastic cover. Adjust the gap position until it is moderate (usually kept at 3 ~ 5mm). Put on the plastic cover, turn on the power, and check whether the strength is appropriate. If inappropriate, repeat the above steps until appropriate.
