1.Electric steamerHow to use
1. Put the right amount of water and the food to be processed Enter the electric steamer, (the water level of the automatic water supply electric steamer basically submerges the electric heating tube, and the water supply of the manual water injection electric steamer should not exceed the water level mark), close the box door, turn on the power supply, select the working mode, and wait for it to work.
2. After the processing is over, after the steam in the box is completely released, turn off the power of the electric steamer, then unplug the plug, and open the box door to take out the food.
2. Precautions for the use of electric steamer
1. The automatic water supply type electric steamer should check whether the water pressure of the water supply meets the requirements of the manufacturer. Whether the water valve is open, and whether the drain valve is closed. Whether the drain valve of the manual water injection electric steamer is closed.
2. Check whether the water level of the automatic water supply type electric steamer basically submerges the electric heating pipe, and whether the water supply of the manual water injection type electric steamer reaches the water level mark.
3. The door of the box should be tightly closed to avoid leakage of steam, otherwise it will not only waste energy, but also easily cause burns to operators.
4. When the box door is opened after work, the steam in the box should be completely released to avoid scalding people.
5. When the electric steamer fails, due to its metal casing, the power should be turned off first, and then the fault should be checked. It is best to notify a professional for overhaul to avoid danger.
6. After use, the water in the compartment should be drained to prevent the electric heating tube and metal surface of the electric steamer from being damp and aging. Remove the dirt on the electric heating pipe, so that the electric heating pipe conducts heat quickly, and does not cause the electric heating pipe to overheat and burn out.
7. Clean the inner and outer surfaces to keep the electric steamer clean and hygienic, but do not spray it for cleaning, which will cause the electrical components to be damp, short-circuit or even leakage.
8. When using an electric steamer with pressure, please set the size of the pressure valve to about 80kpa, which is beneficial to protect the safety of operators. Do not leave people during the operation. If necessary Make sure that people walk off the power.
