I. What are the characteristics of industrial washing machines
As one of the washing equipment, industrial washing machines are often used in hotels, institutions, schools, hospitals, washing plants, laundry Housing and other industries, solve a large number of linen and clothing washing. What are the characteristics of a commonly used industrial washing machine?
1. Computer control, manual selection, large cleaning volume, high cleaning rate, low energy consumption, low noise, small vibration, and beautiful appearance.
2. Advanced structure, suspension and shock absorption.
3. Frequency control, power saving.
4. It can be used in hotels, hospitals, washing industries and universities.
5. Cotton, wool and linen can be washed.
Second, how to use industrial washing machines
Industrial washing machines are complicated due to their complicated pipelines. Therefore, it is necessary to strictly follow the operation steps of the manual. At the same time, when choosing a detergent, it should be filled and used according to the detergent instructed by the manufacturer. The following is how to use an industrial washing machine.
1. Connect the power supply, open the power switch gate, and make it in the ON position.
2. Press the electric button, from the transparent observation, turn the sliding door of the rolling box upwards, open the sliding door, put the clothes we are going to wash in the drum, and then lock the elastic door lock Close the sliding door with the entry button, and then close the outer door.
3. Put in appropriate clean water, and the clothes can not be buried. Turn the timer clockwise. After washing the clothes for five minutes, turn off the timer.
4. Open the outer door and pour pre-melted detergent into the washing machine. At this time, there is no need to open the sliding door of the drum. Each kilogram of clothing needs about 15-25 grams of detergent. The time is 30 minutes.
5. When it is necessary to humidify and wash, the steam valve can be opened slightly, and the humidification and humidity are usually controlled below 60 degrees Celsius.
6. After washing, open the exhaust valve, drain the sewage, close the drain valve, and rinse with clean water. The number of rinses is usually 2-3 times.
7. After each work, there must be accumulated water in the box, and the power supply must be cut off.
