After the printer ink cartridge is dry, if you use it again, you need to clean the printer ink cartridge first to prevent the print head from being blocked; the following is the cleaning method of the printer ink cartridge:
1. Carefully remove the ink cartridge in the printer .
2. After removing the ink cartridge, find the nozzle of the ink cartridge (the part at the bottom of the ink cartridge that is similar to the integrated circuit).
3. Prepare a pot of warm water (50 ~ 60 degrees Celsius), soak the nozzle at the bottom of the ink cartridge in the water for 5 minutes, be careful not to put the entire ink cartridge in the water.
4. Take the ink cartridge out of the water and shake it with appropriate force. When no ink flows out from the nozzle, gently wipe it with a fine cotton cloth or napkin. Be careful not to wipe the nozzle directly, otherwise it will easily cause the nozzle to be blocked, resulting in poor printing effect.
5. Ventilate and dry the cleaned ink cartridge properly, and then re-install it into the printer.
The ink cartridge is dry, what should I do?
If your ink cartridge has not been used for a long time, it may be blocked. You can wipe the print head with a clean and soft cloth dipped in a little anhydrous alcohol, then poke the ink holes one by one with a toothpick, is there any obviously damp ink? If the color is very light or almost non-existent, you can use anhydrous alcohol to rinse the ink injection holes repeatedly until they are basically clear. After the inside is dry, you can add new water.
What should I do if the inkjet printer ink cartridges are dry
Use the warm water bubble nozzle to shake it to see that the ink does not work.
It’s best to take it to a professional inking dealer and they have a shock-cleaning tool.
If there is ink but no ink, it is better to let the inking dealer fix it without paying money.
Connecting the ink cartridges in the printer with a rubber tube and continuously refilling the ink cartridges saves money without buying ink cartridges. The modification is about 100 yuan or less.
What should I do if the HP printer ink cartridge is dry
Before filling, poke the injection hole with a toothpick to see if the color is correct, and then add it. Don’t add too much, just let the nozzle leak a little silent water, and then install it after drying.
