[Outdoor Air Conditioner] Installation of the external unit of the air conditioner requires how to clean the external unit of the air conditioner
The air conditioner is generally divided into two parts, one is the indoor unit, which is the The part that is closely related to us and cools us down; the other is the outdoor unit. However, it is installed outdoors and is exposed to the wind and the sun, so special attention should be paid to the installation. Where is the ideal installation location for the outdoor unit of the air conditioner? What are the precautions for installation? The comfort 100 below will take you to see it together.
Air conditioner outdoor unit installation
Air conditioner outdoor unit installation—where to install
The ideal location for outdoor unit installation is the north or east wall, where there is less direct sunlight; if it must be installed on the south or west wall, it is best to have a sunshade object, and ensure that the outdoor unit is Air circulates normally. There are no obstacles around the outdoor unit to maintain good heat dissipation. The back and sides of the condenser should be more than 1000px away from obstacles, and the front should be more than 2000px away from obstacles. The outdoor unit is mounted on a solid wall or balcony floor to reduce vibration. The unit should be as close as possible to the indoor unit to reduce pipeline resistance and Freon loss. Generally, the outdoor unit of the air conditioner set on the outer wall is placed like this. The standard is that the two share a platform. If you want to put two outdoor units on the same side of your home, you can choose to let the installer use brackets to fix the outdoor units instead of stacking the two outdoor units on top of each other.
Precautions for installation
1. The installation location of the air conditioner should avoid harsh natural conditions (such as heavy oil smoke, heavy wind and sand, direct sunlight) or high temperature heat source); oil fume and sand can easily damage the air conditioner, so the air conditioner should be avoided as much as possible. Direct sunlight or high temperature heat sources will cause the air conditioner to not cool in time, and the cooling effect will be poor.
2. The installation location of the outdoor unit should be as close to the indoor unit as possible, and the conditions of air circulation, no sunlight or little sunlight should also be considered. The outdoor unit should be installed on the outer wall of the air-conditioned room. The best orientation is north, the second is south, and the worst is east and west.
3. There should be a space of more than 10 cm on the side and back of the air inlet of the outdoor unit, and the space in the front exhaust direction should be more than 70 cm.
4. The installation surface of the air conditioner should be sturdy and have sufficient bearing capacity. When the mounting surface is an old wall or roof of a building, it must have a solid brick, concrete or equivalent strength mounting surface. The installation site should be able to bear the weight of the outdoor unit, and there should be no vibration and no increase in noise. For example, if the air conditioner is installed on the protruding balcony, it will produce strong resonance and make a lot of noise. Usually installed under the window of the bedroom, separated by the window and the wall, it will greatly reduce the noise. And it can be easily installed under the window to ensure the convenience of maintenance and cleaning, the user’s air conditioning cover and maintenance.
5. A place where the exhaust air and noise do not affect the neighbors.
6. Outdoor units of air conditioners should not be installed in public places such as passages, stairs, and exits inside the building.
The outdoor unit of the air conditioner is the host of the air conditioner, that is, the core part of the air conditioner. And due to frequent wind, sun and rain, the wear rate is relatively high, once a fault occurs, it will affect the use of the entire air conditioner. Therefore, special attention should be paid to the installation of the external unit of the air conditioner. Choosing the installation location and following the installation precautions can not only prolong the service life of the air conditioner and improve the performance of the air conditioner, but also eliminate potential safety hazards and ensure personal safety.
How to clean the external unit of the air conditioner
Do you need to clean the external unit of the air conditioner?—Introduction to the external unit of the air conditioner
The outdoor unit of the air conditioner is actually the main unit of the air conditioner. The four major components of the cooling and heating of the air conditioner: the compressor, the condenser, the capillary tube, and the evaporator are all installed in the outdoor unit. The compressor is the heart of the air conditioner. The air conditioner mainly compresses the refrigerant into a high temperature and high pressure gas through the compressor to achieve heat exchange. Therefore, the maintenance of the outdoor unit is also very important, which can effectively improve the cooling effect of the air conditioner and save energy.
Do you need to clean the outdoor unit of the air conditioner? Water for cleaning the outdoor unit of the air conditioner
When cleaning the outdoor unit of the air conditioner, first cut off the power supply of the air conditioner to prevent electric shock. You can directly rinse it up and down with tap water, just rinse the fin-shaped aluminum foil heat sink of the outdoor unit of the air conditioner, that is, the temperature exchanger. When rinsing, the right side of the outdoor unit of the air conditioner should also be rinsed. When flushing the outdoor unit of the air conditioner, be careful not to directly flush the outdoor unit of the air conditioner to avoid water flowing into the fan bearing and causing poor lubrication.
Do you need to clean the outdoor unit of the air conditioner? Brush for cleaning the outdoor unit of the air conditioner
If it is inconvenient to wash with water, you can choose a long brush to clean the air conditioner When cleaning the outdoor unit with a long-haired brush, you must use the brush to dip it in water, and rinse the fin-shaped aluminum foil heat sink of the outdoor unit of the air conditioner, that is, the temperature exchanger. When washing, just brush back and forth from top to bottom.
Do you need to clean the external unit of the air conditioner – the pressure pot for cleaning the external unit of the air conditioner
You can also use the watering pot when cleaning the external unit of the air conditioner The pressure pot is filled with water, pressurized, and sprayed and rinsed on the chiller of the outdoor unit of the air conditioner. If the dirt blocks the air path of the heat exchanger, you can use a vacuum cleaner to absorb the dirt blocked in the air path of the heat exchanger. If the location of the air conditioner is hard to reach by hand, you can choose a long water gun to flush.
The steps of cleaning the external unit of the air conditioner are introduced here. The air conditioner is an indispensable electrical appliance in our home now, which brings a lot of convenience to our life, so that we can enjoy the warm in winter and cool in summer It’s fun, but everyone must regularly maintain the air conditioner, only in this way will the air conditioner at home serve us better.
