[Maintenance of floor heating and floor heating]How to maintain the floor heating? Can the floor heating be heated?
How to maintain the floor heating floor
In the process of using the floor, everyone knows the importance of maintaining the floor. The same is true for the floor heating floor. If you don’t pay attention to maintenance at ordinary times, the life of the floor heating floor will be shortened. Here are a few tips on how to maintain underfloor heating.
1. The minimum temperature should be set for the first use.
Usually, many things need special attention when they are used for the first time. Underfloor heating should be set to the lowest temperature for the first use, and then slowly warmed up. Generally, the temperature rises by about 1°C every hour. The purpose of this is to allow the floor to gradually adapt to the increase in temperature, without causing the floor to deform due to uneven heating due to the accelerated temperature.
2. The ground temperature should not be too high
When using the geothermal heating system, the temperature of the ground surface should not exceed 28°C, and the temperature of the water pipe should not be higher than 45°C. Otherwise, it is easy to affect the service life of the floor heating floor. Usually, the indoor temperature in winter is about 22 degrees Celsius.
3. The cooling should be gradual when turning off the geothermal system.
If the weather warms up, the indoor geothermal system does not need to be used. It is to be gradual.
4. Pay attention to humidification when the air is dry
When the indoor air is relatively dry, consider humidifying the room to prevent the floor from cracking and deforming due to long-term high temperature.
Can underfloor heating be heated?
Underfloor heating is usually used in homes with underfloor heating systems, but for the question of whether underfloor heating can be heated, Many friends are not very clear. Let’s talk about this problem below.
Under normal circumstances, it is not recommended to heat the floor heating. Because the floor heating floor itself and glue are used in the process of laying, it contains a certain amount of formaldehyde. The release of formaldehyde will be accelerated in a high temperature environment. It is reported that each time the temperature increases by one degree, the release of formaldehyde will increase by 15%-30%. When the floor is heated to 30 degrees, the release of formaldehyde will reach the maximum, which is more than 10 times the release at room temperature. Therefore, heating the floor is likely to cause excessive formaldehyde.
From this point, it also shows that when purchasing floor heating floors, we must pay attention to the environmental protection of the floor, that is, whether the formaldehyde emission content meets the standards. The identification of formaldehyde content is difficult to judge by the naked eye, so it is particularly important to choose a large brand floor heating floor with quality assurance. The regular brand floors are all products that have passed the national quality inspection, and the formaldehyde content is very low, which will basically not affect the health of the human body.
