[Geothermal cleaning machine]Which kind of geothermal cleaning machine is good and how to use it
Which kind of geothermal cleaning machine is good
1, HVAC floor heating cleaning machine
Power supply: The floor heating cleaning machine exclusively adopts the national famous brand leakage protector, which makes the machine safer to use and avoids the disadvantage that the low-voltage power supply cannot work continuously for a long time. Pressure gauge: Anti-vibration pressure gauge, filled with damping oil, not comparable to ordinary pressure gauges. (Specially suitable for pulsed air pressure), so that the pressure inside the pipeline is visible. In the process of geothermal cleaning, it is inevitable to encounter “dead pipes” that are seriously blocked, or a large number of impurities accumulate at the sewage interface due to excessive sediment, which will rapidly increase the internal pressure of the pipeline. The shock-resistant pressure gauge can reflect the changes in the internal pressure of the pipeline at any time, so that the operator can take timely measures.
And the shock-resistant pressure gauge is by no means comparable to ordinary pressure gauges, and the pressure gauge will not fail due to severe pulse pressure. Controller: Adopt famous factory products that have passed the national compulsory certification of CCC and CE, and are not cheap. Output pressure control valve: Make the pressure in the pipeline adjustable, controllable and stable, and avoid pipe burst accidents due to the material problem of geothermal pipes. Regulator: National famous brand product, more reliable to use and longer lifespan. Shell: Exclusive use of imported high-purity stainless steel, corrosion-resistant, more beautiful and stronger.
2,Pulse geothermal cleaning machine
Air compressor: producing 8 pressure High pressure air to provide air power for cleaning. Air and water pulse generator: It is the main component for producing air pressure pulse. After combining air and water, it works under the control of the pulse controller. Pulse controller: Control the pulse generator to emit physical pulse waves of different frequencies and wavelengths according to cleaning needs. Connect the pipe, connect the cleaning machine and the geothermal water separator, connect the washer and the water source, and connect the water separator to return water and sewage.
3,TM-760APulse Geothermal Cleaner
The product adopts intelligent design, and most of the electrical components are imported components, which have the characteristics of strong function, stability and reliability. Perform high-speed impact and microwave vibration to peel off the rust deposits on the inner wall of the pipe and quickly discharge it out of the pipe, without any damage to the pipe wall while cleaning. This equipment can not only clean geothermal pipes, but also clean heating and water pipes. Cleaning of roads and complex pipelines.
How to use the geothermal cleaning machine
(1) Connection
1. Close the main valve separating the water supply and return water of the water distributor;
2. Connect the pulse introduction pipe, and connect the digital computer pulse generator to the head end of the water supply main bearing block of the water distributor;
3. Connect the water pipe, and connect the water source to the computer pulse generator;
4. Connect the air pipe, and connect the air compressor to the computer pulse generator;
5. Connect the sewage pipe, one end is connected to the head end of the return water general bearing of the water distributor, and the other end is inserted into the floor drain.
(2) Startup and cleaning
1. Connect the air compressor and the digital computer pulse generator power supply, press the power switch on the pulse generator, and start the compressor to make it work Reached the rated pressure of 8Mpa;
2. Open the compressor air switch and the system water supply valve;
3. Open a separation valve on the water separator, close the other separation valves, and wash a Open one by one, and clean one by one;
4. After the sewage end sees the backwater, operate the controller to control the digital computer pulse generator to emit physical pulse waves into the geothermal pipeline to start cleaning. The pulse cleaning frequency can be adjusted according to the length of the geothermal pipe, the installation time and the state of scaling. Until it is cleaned
2. Untie the four connecting pipes respectively;
3. Open the main valve for the separation of the water supply and return water of the water separator;
4. Return the water separator to the state before washing.
Precautions for using geothermal cleaning machine:
1. All connection parts must be tightened to prevent leakage. When connecting, be sure to insert the tube to the end, and be sure to remove it Press the snap ring to the bottom;
