Installation method of water resistance rowing machine
1. Open the package, remove the packaging material, and thread the slide seat onto the slide rail from the back to the front.
2. Flip the slide rail and install the rubber bumper with two screws of 6mm in diameter and 10mm in length.
3. Use 10mm diameter, 25mm length screws and flat washers to assemble the reinforced steel plate and rear legs and then cover with rubber tube plugs.
4. Use a screw with a diameter of 10mm and a length of 95mm and two open spring washers to fix the guide rail and the host. At this time, there is no need to tighten it, and then tighten it after all adjustments are completed.
5. Connect the sensor plug to the plug on the main unit, pay attention to the socket notch corresponding to the plug protrusion.
6. Install screws, rubber washers, flat washers and nuts with a diameter of 10mm and a length of 180mm at the vertical connection between the guide rail and the host.
7. Install in the order of pedal-nylon ring-shaft tube-nylon ring-pedal, adjust the screw, and adjust the middle leg to be 3-5mm off the ground when not in use.
8. Install the battery for the instrument, and adjust the resistance knob to the MAX position, the maximum resistance position.
9. Open the water injection hole and add a piece of water purifier. Generally, one piece can keep the water clean for more than half a year without direct sunlight. There are 4 pieces as a gift.
10. Use the supplied manual water pump to add pure water to the water tank. Please note that the height of the water surface should not be higher than the water level line on the right side of the water tank.
Cleaning and maintenance of water resistance rowing machine
1. The resistance of the water tank must be adjusted to MAX to ensure accurate water injection.
2. Do not overfill the water tank, the maximum water filling volume is about 17 liters, and do not exceed the white water level line.
3. Purified or distilled water is recommended.
4. It is not necessary to add a water purifying tablet when adding water for the first time. It is recommended to change the water after 2 to 3 months and add a water purifying tablet.
5. The water tank should avoid direct sunlight. If the rowing machine must be placed in a place with direct sunlight, cover the water tank of the rowing machine with a thick cloth when not in use, which can resist most ultraviolet rays. , to avoid affecting the water quality and aging of the water tank.
Frequency of tank changes
Varies depending on the location of the rowing machine and exposure to sunlight.
1. After using the chlorine tablets, you must apply for the original chlorine tablets, and do not use the chlorine tablets produced by other manufacturers on the market to avoid damage to the water tank.
2. If it is not used for a long time, it is best to use a siphon to drain the water, and change the water every 3 to 6 months.
3. Try not to expose the rowing machine to the sun, so as not to affect the water quality and avoid direct sunlight, which can help reduce the number of water changes.
4. When the water changes color or shows signs of algae and bacterial growth, it is necessary to replace the water in time.
Declare: The above methods are derived from the program system index or shared by netizens. They are for your reference only and do not represent the research views of this website. sex and authority.
