1. Installation method of floor heating towel rack
1. Select the installation position, generally suitable for installation on the wall above the toilet position, the washbasin or the upper left wall of the bathroom cabinet position face or the upper right wall, and the left or right free wall when entering the bathroom.
2. Measure the distance between the mounting holes on the frame and determine the spacing between the horizontal holes and the upper and lower holes.
3. Measure the distance between the upper and lower brackets to determine the height of the upper bracket; take the distance between the left and right brackets to determine the horizontal position of the bracket; use a marker to make sure points on the tiles Marks determine where to punch holes.
4. Drill holes with a pistol drill. If it is a tile wall, please use a glass drill to penetrate the tile first; if it is a cement wall, you can directly use an impact drill.
5. After all the four holes are drilled, insert the plastic expansion screw and tap it into the wall lightly with a hammer; use the Allen wrench to reversely loosen the pointed screw that has been installed in the square fixing bracket, Take out the cylindrical bolts inside, insert them into the four circular fixing holes on the frame body, and tighten the pointed screws.
6. Tighten the top and bottom plugs of the frame by hand, and install the exhaust valve above the frame with a key wrench. Note that the exhaust valve must be above the installation frame, and must be connected to the heating rod. The installation position forms a diagonal line.
7. Hold the thermostat, align the three wire holes in the thermostat with the three metal contacts of the heating rod, and push it together in the direction of the heating rod, so that the plastic ring is close to the metal of the heating rod. Under the base, then hold the white plastic ring with a black plastic wrench and turn it clockwise to tighten until it stops.
8. Fix the bracket, lift the bracket body, insert the cylindrical bolts into the positions of the four brackets on the wall, and then use the Allen wrench to tighten the pointed screws.
Second, what are the accessories of the electric towel rack
Expansion screw*4, fixing screw*4, square fixing bracket*4, exhaust valve *1, plug*2, Y-type wrench*1 (for rotating the heating rod base), key wrench*1 (for installing the exhaust valve), black plastic wrench*1 (for rotating the thermostat), inner Hexagon wrench*1 (for rotating the bracket fixing screw), funnel*1 (for filling)
What are the installation methods of the electric towel rack
The installation of electric towel racks mainly includes three categories: open line, dark line and no punching.
1. Open wire
As the name implies, it is the installation method in which the wire is exposed to the outside. This requires a reserved socket. If there is no reserved socket, an open wire is required. Go dark and install the wire through the open wire slot. This wiring method further improves the safety of electrical products in the bathroom.
2. Concealed wire
Concealed wire installation is more used in hotels, which is convenient for centralized control switches. This type of electric towel rack is similar to the floor heating system. A central controller, just connect the controller to the towel rack through the hidden line in the wall; it can also realize intelligent control, and the projection screen uses network resources to realize remote control. The biggest advantage of dark line installation is that it looks neat and more beautiful in appearance.
3. No punching
The mainstream electric towel racks on the market are mostly dry heating, that is, carbon fiber heating or alloy heating wire heating. The body is very light, just use nail-free glue to open four holes on the wall and hang it like a water heater.
4. What is the appropriate height for the installation of the electric towel bar?
There is no special requirement for the installation height of the electric towel bar. The normal height is 1.5m to 1.7m from the ground Left and right, it can be determined according to the needs of the user and the average height of the family. Usually, it is appropriate to install it in a place that is within the reach of the hand. If the family members are generally tall, you can also consider putting it higher. The main thing is that it is comfortable to hold and look comfortable. Deliberately to meet the size requirements.
The towel rack is usually installed above the bathtub, generally opposite the faucet, about 1.6m above the ground.
Declare: The above methods are derived from the program system index or shared by netizens. They are for your reference only and do not represent the research views of this website. sex and authority.
