1. Do I need to add water to the newly bought plumbing blanket?
When the weather is cold, many friends will use a plumbing blanket for heating, which is more comfortable and safer than an electric blanket, but The disadvantage is that you need to add water, which is more troublesome. Do I need to add water to a newly bought plumbing blanket?
Generally speaking, the newly purchased plumbing blanket has no water and needs to be filled with water; if it is used directly without adding water, it cannot be heated without water, and the plumbing blanket will not work properly, and may also cause damage.
Second, when do you need to add water to a plumbing blanket?
When using a plumbing blanket, the water will evaporate, so the water will evaporate after a while, and you will need it later If you add water yourself, when should you add water to the plumbing blanket?
Regular plumbing electric blankets have a prompt device, usually an alarm light. When the plumbing blanket is out of water, the water shortage alarm system will light up by itself, which is to remind you that it is time to add water, and slowly add water until The alarm system is no longer illuminated. Under normal circumstances, it is usually necessary to add water once every 1 to 2 months when using a plumbing blanket.
Three, how to add water to a plumbing blanket
The method of adding water to a plumbing blanket is generally described in the instruction manual. Taking a conventional plumbing blanket as an example, the method of adding water The steps are as follows:
1. Fill up the water in the water injector first, and fasten the bottle cap of the syringe tightly.
2. Remove the bottle cap of the water injector from the top of the water injection hole cap.
3. Then take out the water injection pipe of the electric heating blanket, open the water injection pipe, and connect the water injection port of the water injector to the water injection pipe of the electric blanket.
4. Fill the water heating blanket with water by squeezing, at this time, liquid will flow out of the pipes inside the water heating blanket.
5. After adding water, close the water injection pipe and restore it to its original state.
4. What water should I add to the plumbing blanket
When adding water to the plumbing blanket, many friends will directly use tap water, but in fact, tap water is not a good solution. s Choice. Tap water is rich in heavy metal ions. Adding tap water will easily accumulate scale, which may reduce the performance of the hose in the blanket body for a long time, and may cause blockage in serious cases, affecting the performance of the plumbing blanket.
Generally, when adding water to a plumbing blanket, use water that is relatively clean, free of impurities or less impurities, and easily volatile. It is recommended to use distilled water or purified water.
