1. What’s wrong with the plumbing blanket not being hot?
The plumbing blanket is a commonly used heating appliance in life. It is an upgraded product of the electric blanket. Sometimes, sometimes it is not hot, what is going on? The reasons why the plumbing blanket is not hot are generally as follows:
1. The water pump is faulty. The plumbing blanket with a water pump needs the continuous operation of the water circulation pump to transfer heat to the blanket body. This causes the water to not circulate, which in turn causes the plumbing blanket to not be hot.
2. The pipes in the plumbing blanket are not smooth, and some places are blocked, causing the water to not circulate, and the plumbing blanket will not be hot.
3. If the power supply is not plugged in properly or the switch is damaged, the plumbing blanket will not heat up even if it is not powered on.
4. The circuit failure of the plumbing blanket, such as an open circuit of the heating wire, will also cause the plumbing blanket to fail to energize and heat.
5. There is a problem with the main engine, and the water heating blanket cannot be heated normally. This fault is relatively large. If it is serious, the whole water heating blanket may be directly scrapped.
Second, how to repair the electric heating blanket when it is not hot
There may be many reasons why the electric heating blanket is not hot. If you encounter such a problem , you can check the faults one by one, and then deal with them. If the repair is not good, you can contact the merchant for repair. The specific maintenance methods are as follows:
1. First, check whether the power supply is correctly connected and whether the heating function is turned on. , whether it is powered on normally, if not, connect the power supply and set it up.
2. If it is not a problem with the power supply or settings, you need to check whether the heating wire of the power supply is normal. If the heating wire is damaged, please replace it within the warranty period. Location maintenance.
3. If there is no problem with the heating wire, check whether there is any blockage in the main body pipe and the blanket body pipe. If there is a blockage, it needs to be dealt with in time. , Clear the water inside, blow the main body pipe with your mouth to see if it is smooth, and blow the blanket body pipe with force.
4. If there is no problem with the above, it means that the main unit of the plumbing blanket may be damaged. Please contact the merchant to solve it within the warranty period; if it exceeds the warranty period, it can be replaced directly.
