How to clean the waste ink collection pad of Epson printers
1. Download a software that matches your printer model from the Internet and reset the printer counter.
2. Open the back cover of the Epson inkjet printer.
3. Find a medical syringe and insert the needle into the bottom of the waste ink collection pad.
4. Use a syringe to repeatedly suck the waste ink from the waste ink collection pad until the waste ink is completely absorbed.
5. After blotting dry, close the back cover of the printer.
How to replace the Epson printer waste ink collection pad
There is a white screw under the rear paper feeder of the Epson printer, unscrew it; on the bottom of the printer You can find the L-shaped removable plastic piece (near where the unscrewed screw is), move it, and remove the entire waste ink collection box. There are only a few sponges in the waste ink collection box. Take out the sponges and sandwich them with two hard plates to squeeze out all the ink. Put the sponges back into the box as they are, and install the box, or replace it with a new one. The sponge pad, tighten the screw on it. Epson Printer Products > >
