Use and precautions of fire emergency lights
How to use fire emergency lights:
1. Emergency lights With a plug, the plug can be plugged into the socket to charge.
2. Connect the power to the main power, the green indicator light will be on, the red indicator light will be off when fully charged, and the emergency light will be in a waiting state, press the “test” button on the panel, the emergency light should be
Lights up immediately.
3. The emergency light will automatically light up when the power is cut off.
Precautions for fire emergency lights:
1. It must be checked before use. The AC voltage is 220V before the power supply, main power, and charging instructions. When the lamp is on, press the “test” button of the lamp, the main power and charging indicator lights go out, and the lamp lights up, indicating that the emergency work is normal.
2. During normal use, if two yellow fault lights are found, it means that the fault should be repaired in time.
3. Contact the manufacturer when replacing the LED light source.
4. It will affect the life of the battery if it is not used. It is recommended to charge and discharge it every three months. In normal use, it should be discharged every six months. When the discharge time is less than the rated value
50% of the time, the battery needs to be replaced, please pay attention to the polarity, specification, voltage and capacity of the battery when replacing.
5. Fire emergency lamps are used in emergencies and should not be discharged at will, otherwise the battery life will be affected.
