The lifespan of LED fluorescent tubes is generally 40,000 hours, and most manufacturers now advertise a lifespan of 60,000 hours. In practical application, it is affected by many factors and cannot reach the theoretical value.
First, how to extend the service life of LED fluorescent tubes
First of all, when LED lamp beads are working, a single lamp The bead will be less heated, and the bracket temperature will not exceed 45 degrees. At this time, the life of the LED lamp will be ideal, but when the LED lamp forms a lamp group, the corresponding temperature will rise, which is not conducive to the long-term use of the LED lamp. . When we choose LED lamps, we can choose a lamp group with a larger distance between the lamp beads, preferably more than 25MM.
Secondly, the choice of the quality of LED fluorescent tubes is a very important factor. And different packaging processes will have a considerable impact on the quality of the product. The LED lamp packaged with ordinary primer has 76% less light decay than the LED lamp packaged with Class A low-decay glue under the same aging environment. Therefore, choosing an LED lamp made with a good packaging process will greatly extend its service life.
Second, LEDHow to maintain fluorescent lamps
1. Don’t switch the lights on and off too often. Too frequent lighting will cause the two ends of the lamp to turn black prematurely, affecting the output power of the lamp, and it should be noted that it will take 5-15 minutes to restart the lamp after turning off the lamp.
2. If the voltage is very low, the two poles of the lamp will emit tungsten at the beginning of lighting, which will cause many point-like pollutants inside the lamp, which will become one of the reasons for lamp damage. , so, it is recommended to turn on the lights under high voltage conditions as much as possible.
3. Fluorescent lamps have many circuits and need auxiliary devices, so they must be used with corresponding transformers, capacitors, etc. to ensure that the lamps are started to a suitable power.
4. Pay attention to maintain a ventilated environment, not only to take away dust, but also to reduce the temperature of the lamp, so as to prolong the life of the lamp.
In short, LED fluorescent tubes are afraid of heat, the higher the temperature, the shorter the LED lifespan, the lower the temperature, the longer the LED lifespan. The ideal operating temperature of LEDs is of course between minus 5 and zero degrees. But this is basically impossible. Therefore, consumers must understand its performance when choosing LED lamps, and at the same time provide reasonable protection when using them, so as to give full play to its optimal use effect and make it brighter for you.
