Cleaning method of the body of the garment steamer
When cleaning the body, do not wash it with water directly, you should choose a soft rag mixed with a little neutral detergent for wiping. Add water to the water tank, pay attention to the capacity, and add a descaling agent. The normal ratio of descaling agent and water is 2:1000. After heating the machine for about half an hour, unplug the power and drain the sewage through the drain.
How to remove dirt from a garment steamer
1. Pour 10g of descaling agent into the sink of the garment steamer.
2. Add 400g of water to the water tank and put it on the body for 30 minutes to fully dissolve the descaling agent.
3. Plug in the power, turn on the power switch, and let the product work by itself for 10-15 minutes.
4. When the water is basically evaporated, turn off the power switch of the product and unplug the power plug.
5. Fill the water tank with water and place it on the steamer, open the drain, the water in the tank will be discharged from the drain together with the scale in the body. NOTE: Rinse repeatedly until no scale is visible in the drained water. Please tighten the drain valve after rinsing to avoid water leakage the next time you use it.
6. Plug in the power again, turn on the power switch, let the product work by itself for 3-5 minutes to completely evaporate the remaining water in the body, turn off the power and cool it down and store it.
Method for removing stains in the sink of the garment steamer
1. Pour an appropriate amount of descaling cleaning solution into the waterproof part of the garment steamer.
2. Add 400 grams of clean water to the water storage place, put it on the steamer for half an hour, and the descaling cleaning solution will be completely integrated with the water.
3. Turn on the power, turn on the switch of the steamer, and wait for the steamer to run by itself for about a quarter of an hour.
4. Cut off the power of the machine when the water in the water storage tank is almost evaporated.
5. Fill the water storage tank with clean water and install it on the garment steamer, open the drain valve, and the clean water in the water storage tank will flush out together with the dirt in the garment steamer. CAUTION: Rinse several times with clean water until there is no dirt in the flushed water. After cleaning, close the drain switch to prevent dripping.
6. Turn on the power again, turn on the switch, wait for the steamer to operate for a few minutes, and let the water droplets in it evaporate. Then you can cut off the power and put it away.
Maintenance method of garment steamer
1. Pay attention to drying after cleaning
After cleaning, ensure that the machine is fully dry , in use or collection. We must pay attention to this point, many people put it aside or use it immediately after cleaning, which is very serious damage to the machine.
2. Correctly store the garment steamer
When the garment steamer is not used for a long time, pay attention to the garment steamer. After ensuring that the machine is dry, open the button of the lock, put away the machine lever of the garment steamer, take off the air duct and hanger, and put it back in the box. Please put the collected machine in a dry and ventilated place at home, do not expose to high temperature.
