There is no sound when the bluetooth headset is connected to the computer, what should I do if there is no sound from the bluetooth headset
Q: I installed a bluetooth adapter in the computer, and then used the bluetooth headset to connect to the computer, it has been successful Paired, but no sound. Is this what is the reason?
Answer: I don’t know if the sound you are talking about is for a certain software. For example, if you want to use a bluetooth headset in QQ voice, if you want to use a bluetooth headset in some software, you need special settings. For example, in the audio settings of QQ, it is necessary to manually specify the audio device as a Bluetooth headset device. For the system, when the Bluetooth headset is successfully paired, the system will automatically send audio to the Bluetooth headset. In addition, if there is a problem with the Bluetooth driver, it may also cause similar failures. You can delete the Bluetooth adapter in the device manager, then reinstall it, and then perform the pairing operation.
There is no sound when the Bluetooth headset is connected to the computer?
I believe there must be some friends who have encountered such a problem, so someone asked “What’s the matter with the bluetooth headset connected to the computer without sound?”, summed up the relevant information of the bluetooth headset connected to the computer, and now share it with you .
1. Must have wireless bluetooth earphones and computer bluetooth adapters
Bluetooth adapters and bluetooth earphones should be purchased from the computer market. Below I will use Kaskin’s KS-800 stereo bluetooth earphones To illustrate with an example.
Second, install the bluetooth driver
People who sell bluetooth adapters in the market all advocate that their bluetooth adapters are driverless and can be used when they are installed on the computer. In fact, it is a big mistake!
p>
Advocating no driver means that the system can be used normally with the built-in driver, but unfortunately: the built-in bluetooth driver under XP is lame, and many functions are not supported, so be sure to install bluetooth Driver; I use “Widcomm Bluetooth Driver Chinese Cracked Version v5.0.1.8.rar”, which can be searched and downloaded online.
The installation process is not complicated, just click to accept the agreement and go to the next step.
3. Connect the bluetooth and the earphone together (this step is more critical)
1. Keep the bluetooth earphone and the adapter in a state where the blue light is always on (some are blue and red The lights are on together)
2. Find the Bluetooth device and add the model of the Bluetooth headset you purchased (KS-800)
3. After adding, be sure to enter the matching password ( The default is 0000, and there are also 1234, which are marked on the instruction manual)
4. After the matching is completed, you can see that the Bluetooth headset is not connected in the Bluetooth window (some Bluetooth headsets will make a ringing sound) , and the sound of a call coming in is exactly the same, individual need to press the “answer” button); do not double-click first, it is especially critical!
Fourth, after the connection is completed, use a Bluetooth headset
1. Make sure your bluetooth headset and your bluetooth adapter are always on again (this step is the most critical and is the core success factor for connecting to the computer)
2. Double-click the avatar of the wireless headset again, and enter the match ‘s key.
3. The headphone avatar will turn green, and the sound will generally be directly transmitted from the computer to the Bluetooth headset. Some computers will pop up a prompt bubble below that “audio gateway service” requires the computer’s permission. Always allow the hook to be clicked on it, it will not come out next time; if there is no sound from the headset, please refer to the next step.
4. Select the default device in the “Audio” and “Voice” tabs in the “Sound and Audio Devices” of the Control Panel, and select “Bluetooth High Quality Audio” (generally computers will change to Bluetooth by themselves High-quality audio, don’t be discouraged if some will not change automatically, just change it yourself)
5. After the Bluetooth headset is connected to the computer, adjust the volume of the sound, adjust the volume of the microphone, and you can chat online ( QQ, MSN, SKYPE, etc., etc., use whichever you like, “Wireless Bluetooth, like you to chat, like you to chat again!”)
Remarks: Bluetooth headsets have the farthest range It’s about 7M (straight-line distance), so you can’t run too far, but while rolling on the bedroom bed, chatting with friends on QQ, there should be no problem;
The use of IVT BlueSoleil The method is also similar to the above
There are two settings for the Bluetooth binaural headset: “Headphones” and “Headphones and Microphones”. When setting, the blue lights should be all on.
