[Invisible ceiling fan light installation] How to control the invisible ceiling fan light installation process of the ceiling fan light
I. Installation steps
1. First, fix the hanger on the ceiling. The screws for installing the hanger should be selected according to the material of your ceiling, and the screws that can fix the hanger must be able to withstand a tension of 16 kg (35 pounds).
2. Put the wave cup on the boom, the power cord of the motor is drawn out from the inner hole of the boom, and then put the end of the boom with two holes into the lifting head of the motor, and insert the connection. bolt, lock the safety knob, and tighten the set screw.
3. Hang the installed motor on the hanger. Note that there is a groove on the hanger on the hanger. This groove should be stuck in the convex point of the hanger. Then connect the power cord, and the wiring method should be wired according to the requirements of different ceiling fans. After connecting the wires, lock the wave cup to the hanger.
4. Align the 3 small holes on the fan blade with the 3 small holes on the blade fork. The angle deviation of the ceiling fan will cause the ceiling fan to shake when it rotates.
5. Fix the assembled fan blades to the motor respectively, and tighten the fixing screws. Then turn the motor gently by hand to check whether the motor is flexible when it rotates, and confirm that the fan blade does not collide with any object.
6. Connect the power cord of the assembled light stand to the power cord left in the motor switch box, then connect the light stand to the switch box, and tighten it with screws. Then unscrew the lamp ring, install the lampshade, and lock the lampshade with the lamp ring. It is best to install the light source and tighten it.
7. After the installation is complete, you should check that all the screws on the ceiling fan are tightened, and then turn on the power to test whether the ceiling fan is running normally. If there is a ceiling fan with a pull cord switch, one pull cord is to control the light on and off, and the other pull cord is to control the fan switch and speed.
8. Try running for about 10 minutes, and check again whether all the screws or coils on the ceiling fan are loose. Ceiling fans should be checked at least once a month when they are in normal operation.
9. When using the pull-rope switch, use force to be parallel to avoid rapid and continuous pulling, otherwise it will burn out the switch contacts.
10. Push the forward and reverse switches when the motor is stopped. The forward and reverse switches cannot be set in the middle, otherwise the motor will not rotate or the motor will be burned out.
Second, safety precautions for installation
1. Electricians or experienced qualified personnel must be invited to operate in accordance with various standard procedures during installation and wiring. .
2. During the installation or wiring process, it is necessary to check whether the local voltage is in line with the ceiling fan; the switch must be turned off and do not operate with power on.
3. You must read the manual and various safety information carefully before installing the new ceiling fan and check the attached assembly drawings.
4. When digging or drilling holes in the wall, do not damage the wires and other hidden facilities.
5. At the installation site you selected, when the fan blade rotates, it should not touch any obstacles, and there should be at least a distance of 2.15M from the edge of the blade to the ground.
6. The screws that fix the ceiling fan must be able to withstand a pulling force of 16 kg to ensure the safe and reliable operation of the ceiling fan.
7. When you install a ceiling fan, balance the blades or clean, do not bend the fan’s forks.
8. Do not install the switch for controlling the ceiling fan beside the bathtub or where the shower can reach.
9. Please do not install any solid-state circuit or acceleration regulator in this ceiling fan system.
10. The installation of ceiling fan lights is a high-altitude operation, so be sure to pay attention to safety. Be sure to tighten all screw threads during installation.
How is the ceiling fan light controlled?
The fan has three different control methods: wall control, pull cord, remote control.
These three control methods can control the lights and fans separately, but the wall control and remote control cannot be installed on the same ceiling fan light at the same time. Most models come with a drawcord control, wall and remote controls are sold separately.
Rope method:
There are two ropes on the ceiling fan, one for the light and the other for the fan position. The light and the fan do not affect each other. Multiple wiring can be installed. Only the pull-rope method can control the multi-stage switch of the light. (You can use ordinary lamp wires, that is, one fire and one zero).
Wall control method
The wall control is a controller installed on the wall to adjust the speed and control the light. It is equipped with an 86-switch cassette (home decoration). most commonly used cassette sizes). The knob for speed regulation and the light switch are all on the same panel, or the light switch can be installed separately. Wall control for ceiling fans with lights requires three wires, and two wires are reserved for those without lights. (One more line should be laid, that is, two fires and one zero).
Remote control method
Use the special frequency remote control to adjust the speed and turn on and off the lights, which is convenient for control. The remote control has timing function, and you can set the fan when you sleep at night. Set closing time. The remote control is to install the receiver directly in the hanging clock, and it can be installed without extra wiring. (You can use ordinary lamp wires, that is, one fire and one zero).
This article introduces in detail the installation method of the invisible fan ceiling and some problems that need to be paid attention to during installation, as well as a detailed statement of the knowledge of the three control methods: the pulling rope method, the wall control method and the remote control method. Hope you all understand!
If you want to install an invisible fan chandelier in your home, you’d better read this article carefully.
