1. How to connect the microphone to the computer
Need to use a driver microphone:
1. Correctly connect the microphone to the computer connect them.
2. Open “This PC” on the WIN10 system desktop, right-click “Properties”, and then click “Device Manager” in the left sidebar of the opened page.
3. Open “Audio Input and Output”, select “Microphone” and right-click “Update Driver”.
4. Click “Start”, select “Privacy” in “Settings”, select “Microphone”, and turn on “Allow apps to access your microphone”.
5. Right-click the “Small Speaker” at the bottom right of the computer, select “Sound”, click “Record”, select “Stereo Mix” and right-click “Disable”.
6. Right-click “Microphone” and select “Properties”, select “Level”, and adjust the microphone volume to the maximum.
Wireless bluetooth microphone connected to computer: Turn on the wireless bluetooth microphone – click on the computer “Control Panel” – select “Hardware and Sound” – “Add Device” – Laptop Search for Bluetooth – Click OK.
The microphone without driver is connected to the computer: Some microphones can be directly connected to the computer through the USB port using the microphone charging cable, and there is no need to install the driver, as shown below
Second, how to connect the microphone to the mobile phone
Connect the wireless microphone to the mobile phone: turn on the wireless Power on the microphone, turn on the Bluetooth of the mobile phone, find the microphone device that needs to be connected, and click the name to connect it to use.
Wired microphone to mobile phone: Plug the microphone and headphone into the microphone and headphone jacks of the adapter cable respectively, and plug the other end of the adapter cable into the mobile phone.
If there is an independent sound card, plug the microphone and earphone into the sound card, use a cable with 3.5 plugs at both ends, plug one end to the sound card, and the other end to the phone.
How to connect the microphone to the speaker
How to connect the wireless microphone to the speaker
1. Plug the wireless microphone receiver into the computer’s sound card or independent sound card, and connect the speaker to the computer or independent sound card’s speaker output.
2. The receiver of the wireless microphone is connected to the microphone jack of the speaker or power amplifier.
3. Then turn on the karaoke function of the stereo, turn on the switch on the microphone, adjust the volume of the microphone, and then you can use the wireless microphone.
Wired microphone connected to audio
The above connection diagram is for reference only, please refer to the microphone manual for details.
Declare: The above methods are derived from the program system index or shared by netizens, and are only for your reference and use. They do not represent the research views of this website and are proved to be effective. Please pay attention to screening. The authenticity and authority of the source of the content.
