1. How to solve the current sound in the headset
When we use computer headphones, we often encounter noise and rustling sounds, which sound like electric current. , generally we call this situation the current wheat, so what is the reason for the current wheat? How to solve the current sound of the headset? The reasons and solutions for the current sound of the headset are:
1. The computer is not cleaned up in time, too much garbage is accumulated in the system, and the computer responds slowly. Solution: Clean up the system junk and antivirus of the computer in time.
2. The headset is damaged. Solution: You can compare the headset with other headsets or computers to see if the headset is damaged. If so, you need to repair or replace the headset.
3. The computer has static electricity. Solution: Touch the iron part of the computer case with your hands. If the current sound disappears, connect a piece of copper wire, connect one end to the screw on the back of the computer, and ground the other end to solve the problem.
4. The microphone of the headset is in a strengthened state. Solution: Remove the microphone enhancement, because some computer sound cards do not support it. Open the control panel, find Sound and Audio Devices→Voice→Recording→Volume, and adjust the microphone slider to the maximum.
5. There are things with magnetic fields and sound waves around. Solution: Take electrical appliances with magnetic fields such as mobile phones and fans farther away.
6. The other party or himself has turned on the internal amplifier or the speaker. Solution: Please turn it off. When using the speakers, you must pay attention to the placement of the speakers, and do not face the microphone.
7. The plug of the earphone is rusted. Solution: The rusted plug will also cause the headset to generate current. At this time, we need to clean up the rusted part.
8. One of the firewalls on both sides is set too high (including LAN users, Internet cafe users), and different broadband users (such as Telecom and Netcom) will have some voice problems. Solution: Adjust the firewall settings, the broadband problem generally cannot be solved.
II. Does the current sound of the headset affect the human body?
The current sound of the headset is generally not the cause of the headset itself, because the structure of the headset is very simple. Two speakers and one microphone, as long as the microphone is not soldered and wired with the speaker wire, there is usually no current sound. The current sound is generally caused by external interference. Is the current sound of the headset harmful?
In fact, the current sound of the headset is not a harmful noise. It is the excess noise that has entered the audio conversion process. The current noise is reflected on the headset, but its frequency is very high. Low, basically does not produce any electromagnetic radiation, is harmless to the human body, but the sound quality is deteriorated; however, if your headset has current sound, generally the other party will be more uncomfortable and will make you “close the microphone”.
