[How to use the blender] How to use the blender food blender usage and maintenance tips
The blender uses the machine
Put the blender After holding the container, turn it to the right to decompose, cut the material into moderate-sized squares and put it into the container, install a cross-shaped or flat-shaped blade according to the difference and quantity of the material, and install the knife after rotating it. in the container.
The mixer will run idly when mixing too hard materials or materials with too little moisture. At this time, you need to hold the two ends of the main unit and shake it gently, which can shorten the processing time of the ingredients. After the stirring work, turn the inlet of the container upwards and rotate the blade to separate.
How to use the blender filter
Combine the blender container cup and the cross-shaped blade, and install the filter on the raised part of the cup , cover the lid to fix the filter, cut the ingredients to be blended into moderate-sized cubes and put them into the filter, cover the top of the Midea blender and start blending.
Maintenance Tips for Food Blender
1. Clean the blender after every use, use a damp towel to clean the blender hook, crib rack and Mixing tank, do not have water in the tank.
2. Clean the mixer as a whole every week. Pay attention not to rinse the equipment with water to prevent water from entering the bearings of electrical appliances or transmission parts, causing damage to the equipment. Check whether the equipment is placed smoothly.
3. Grease all the grease holes on the bearing seat with a grease gun once a month or quarterly, add lubricating oil to the chain and gear parts, check the tightness of the belt or chain, and prevent the belt or chain from slipping. The chain is damaged.
4. When the food mixer is rotating, do not put fingers, chopsticks, knives, forks or spoons into the tank to avoid danger and accidents.
5. Do not pour water higher than 80 degrees Celsius into the tank to prevent the plastic body from being deformed by heat.
6. After the mixer is used, the tank and the blade should be cleaned to keep the utensils clean and hygienic. When cleaning, press the bottom of the tank with your left hand, hold the tank with your right hand and rotate it counterclockwise to separate the tank from the tank bottom.
Seven, do not use gasoline, benzene and other solvents to clean the food mixer shell, so as not to damage the plastic body.
8. After using the mixer for a period of time, if you find that the top column of the switch button is inflexible, you can inject a few drops of edible oil into the two metal rods for lubrication.
9. Always check whether the riveting point of the tool is loose. If it is loose, it should be riveted in time; if the damage is serious and cannot be repaired, the tool should be replaced in time.
10. When not in use for a long time, the food mixer should be cleaned, dried and put into a carton, and stored in a dry and ventilated place.
