[Air Conditioner Fan] How to clean the air conditioner fan and how to repair the air conditioner fan failure
How to clean the air conditioner fan:
1. First of all, we need to use a robot equipped with a camera to have a general understanding of the pollution in the pipeline. Secondly, we need to find the architectural drawings of the house, and work out a specific plan for the cleaning and construction together with the cleaning master. Next, we can open a construction hole in the appropriate part of the air duct, and block the two ends of the opening with airbags. At the same time, connect the dust collector to the construction hole to let the negative pressure air flow into the fan. At this time, Dust and dirt are continuously sucked into the dust collector.
2. Then we use items such as brushes to clean the pipe wall. After cleaning, the robot is dispatched again to check the environment inside the pipe. To confirm, here, we do not need real-time recording, just take a picture to record it. Another benefit of using a robot is the ability to negotiate cleaning quality with the cleaning party. If we want to clean the next pipeline, we can still use the same method. At the same time, pay attention to using the same material to seal the opening. At the same time, the moisturizing layer is likely to be damaged during the cleaning process. We can ask for cleaning. workers to repair it.
How to repair the air conditioner fan failure?
1. One of the most common reasons for fan problems is poor contact. This is not a big problem, and we can solve it ourselves in daily life. The best way is: use a multimeter to measure the main control switch to see if the resistance is normal. If the resistance is too large or too small, problems will occur. If it is a resistor problem, you can repair it or replace it with a suitable resistor.
2. There is another reason for the problem of the fan: the connection between the motor and the fan blade inside the air conditioner is loose. For the solution to this problem, I do not recommend that you go to the repair shop For maintenance, we can solve it by ourselves. We disassemble the screws on the outside of the air conditioner and tighten the screws on the fan blades and the motor inside. However, during maintenance, remember to cut off the power supply and pay attention to personal safety.
