Is the squeeze juicer easy to use, the advantages and disadvantages of squeeze juicer
Low Speed Squeeze Juicer
The working principle of the low speed squeeze juicer is to rely on an internal screw rod at a low speed of 80 revolutions per minute Rotate, squeeze and grind the fruit, the juice flows out through the filter screen, and the pomace is discharged from the slag discharge port. The advantage is that the noise is low; if the juice yield is high when the brittle fruit is squeezed, the squeezed pomace is very dry and not wasted, and the juice yield for leafy vegetables is also satisfactory.
Disadvantages: The fruit needs to be cut into small pieces, and then filled in a little bit to press, which is time-consuming; the squeezed juice is thicker, with fine pulp fibers mixed in it, especially the relatively flat apples , it is almost mushy when squeezed out.
Squeeze Juicer
The Squeeze Juicer Juicer Lid has in its The food feeding port on the upper side and the central shaft hole in the lower inner part; the juice extracting body is installed on the lower part of the juice extracting cover, and has a guide hole, a juice outlet and a slag outlet installed at the bottom; a waterproof boss in the center of the bottom and sealing ring; pressure discharge channel surrounding waterproof boss.
Features of original juice squeezer parts
Bottom annular juice discharge channel; The device has: an upper rotating shaft on the upper part of the screw propeller; a plurality of spirals formed on the outer surface; a plurality of gears distributed along the circumference at the bottom; a lower rotating shaft with a polygonal shaft hole in the center of the bottom; Strain meshes and squeeze meshes are distributed on the upper and lower parts of the outer wall, and the meshes have a plurality of mesh holes.
Easy-to-Clean Squeeze Juicer
Easy-to-Clean Squeeze Juicer Squeeze Crushing Section Including Propulsion The screw and the extrusion cylinder matched with the advancing screw are arranged in the juice collecting cavity, and the filter part is arranged downstream of the extrusion cylinder. The slag juice filter gap of the juicer can adapt to the size of the material under the action of the propelling screw on the material, and the juice yield is high, especially suitable for long-term continuous feeding, easy to clean after use, and extract the foam produced by fruit and vegetable juice. less.
