The machine composition of the automatic punching machine
The automatic punching machine consists of a processing table, a control computer, a rotating motor, a vibration motor, a processing tool head, a pneumatic device, an automatic Turntable, fixed fixture, etc.
Workflow of automatic punching machine
1. According to the processing size, the number of processing holes, the processing holes The size of the machine, the position data of the processing hole, etc., are used to make a fixing fixture. Fasten the clamp and automatic turntable.
2. Set the processing data in the control computer.
3. Fix the material to be processed on the automatic turntable.
4. Start the machine, the machine will complete the drilling, drilling, milling, through-hole, blind hole, multi-hole, high-low hole and other processing procedures at one time according to computer instructions and processing data.
5. After a hole is processed, the automatic drill plate will rotate a certain angle according to the set program, align the position of the next processing hole with the processing head, and start processing again. When the entire turntable is fully processed, the one-time processing process is completed. Remove the processed material. Reload.
6. In the process of processing, if there is a material jam or lack of material, the machine will immediately alarm and stop working, waiting for processing.
7. In the process of processing, when the processing tool head is not sharp, the machine will also immediately alarm to notify the replacement of the tool.
Technical Parameters
Voltage: 220V, 50HZ.
Ground: 4Ω.
Processing materials: all kinds of stainless steel, alloy, copper and other metal materials.
Machining accuracy: ±0.01mm.
Idle speed: the fastest 500mm/s.
Processing speed: 0.1-70mm/s.
Development trend
The automatic punching machine is developed to meet the trend of the application of automation equipment to replace human hands in the manufacturing industry. The problem of manual drilling in the processing links such as drilling, reaming, and milling. With the development and application of automation technology and network technology, automatic punching machines are developing towards unattended and remote control.
