[Balcony Appliance Maintenance] Balcony Washing Machine Maintenance Starting from the analysis of the environment, if your balcony faces north, there should be no big problem, but if it faces south, you have to pay attention first.
The sun on your side is very strong. After a long time in the sun, the white ones are easy to turn yellow, which affects the appearance, and the other colors are easy to fall off the paint. Parts age quickly and reduce life.
In addition, there are many places on the balcony that are connected to the outside, and the dust is large. Putting a washing machine on the balcony on the balcony is also bad for eating dust.
Compared to this method, we can choose to cover with a cloth to reduce direct sunlight and reduce dust accumulation. (Leave me alone on the closed balcony)
Another thing is to prevent mildew. If the washing machine is closed after washing clothes, it will form a dark and damp place inside, because the sunlight outside will cause the washing machine to be damaged. The inside of the drum is warm and humid + dark, which just becomes the favorite growth space of mold. How to solve it? In fact, you only need to open the washing machine door when you are done washing clothes, and then close it when it is dry.
Maintenance of balcony wall-mounted solar water heater
1. There are obstructions above and around the water heater or there is a lot of smoke in the local air, and the surface of the collector is dusty. Treatment method: remove the occlusion or re-select the installation location. In areas with serious pollution, users should wipe the solar energy regularly.
2. The water supply valve is not closed tightly, and the tap water (cold water) pushes out the hot water in the water tank and causes the water temperature to drop. Treatment method: Repair or replace the water supply valve.
3. In order to ensure the normal use of the water heater, the safety valve needs to be maintained at least once a month to ensure the normal pressure relief of the safety valve.
4. The upper and lower water pipes are leaking. Treatment method: replace the pipeline valve or joint.
5. Regularly drain the system to prevent pipeline blockage; and clean the water tank to ensure clean water quality. When the sewage is discharged, as long as the water inlet is normal, the sewage valve is opened, and the clean water flows out of the sewage valve.
6. For the balcony wall-mounted solar water heater, regularly remove the dust and dirt on the transparent cover of the solar collector, and keep the cover clean to ensure high light transmittance. The cleaning work should be carried out in the early morning or evening when the sunshine is not strong and the temperature is low to prevent the transparent cover from being shattered by cold water. Pay attention to check whether the transparent cover is damaged, and replace it in time if it is damaged.
7. Inspect each pipeline, valve, float valve, solenoid valve, connecting hose, etc. for leakage, if any, repair it in time.
8, to prevent stuffy sun. When the circulation system stops circulating, it is called stuffy sun. Stuffy sun will cause the internal temperature of the collector to rise, damage the coating, deform the insulation layer of the box, and break the glass. The reason for the stuffy sun may be the blockage of the circulation pipeline; in the natural circulation system, it may also be due to insufficient cold water supply, and the water level in the hot water tank is lower than the upper circulation pipe. In the forced circulation system, it may be because the circulation pump stops working. To.
9. Regularly clean the inner tank. When used for a long time, the trace impurities and minerals contained in the water will be precipitated for a long time. If it is not cleaned regularly, it will affect the water quality and service life.
10. Regular inspection not less than once a year to carefully detect and eliminate safety performance and other potential hidden dangers.
11. When not in use for a long time, turn off the power and empty the water storage in the inner tank.
12. The water outlet must be opened when filling the water, and the air in the inner tank must be completely discharged before checking whether the water is full.
13. For all-weather hot water systems installed with auxiliary heat sources, the auxiliary heat source devices and heat exchangers should be checked regularly to see if they work normally. As the auxiliary heat source is heated by an electric heating tube, make sure that the leakage protection device works reliably before use, otherwise it cannot be used.
14. When the temperature is lower than 0℃ in winter, the balcony wall-mounted system should empty the water in the collector and install the forced circulation system with the function of antifreeze control system, just start the antifreeze system. Yes, it is not necessary to drain the system.
15. For your health, it is best not to eat the water in the solar water heater, because the water in the collector cannot be completely released, which is easy to breed bacteria.
16. How to prolong the service life: In order to prolong the service life of the solar water heater, users should pay attention to the fact that after the water heater is installed and fixed, non-professionals should not easily move or disassemble it to avoid damage to key components. There should be no sundries around the water heater to eliminate the hidden danger of hitting the vacuum tube. Regularly check the exhaust hole to ensure that it is unblocked, so as not to swell or deflate the water tank. When cleaning the vacuum tube regularly, be careful not to damage the tip of the lower end of the vacuum tube. There is an auxiliary power supply. The solar water heater of the heating device should pay special attention to the water supply to prevent dry burning without water.
17. Baoding balcony wall-mounted solar water heaters need to be cleaned, inspected and disinfected every year and a half to two years. Users can ask a professional cleaning company to clean them, and they can also do some disinfection work by themselves. For example, users can buy some chlorine-containing disinfectants and pour them into the water inlet, let them soak for a period of time, and then release them, which can achieve a certain disinfection and sterilization effect.
18. It is strictly forbidden to operate the electrical parts with wet hands, cut off the power supply before bathing, it is strictly forbidden to use the leakage protection plug as a switch, and the electrical parts are strictly forbidden to be started frequently.
19. The control valves at all indoor hot and cold water mixing places must be hit with cold water or hot water when not in use, so as to avoid the phenomenon of water stringing.
20. When pouring water into the bathtub, do not use the shower head to prevent the shower head from being scalded. When you are away from home for a long time, you must turn off the tap water and the main indoor power supply. (Ensure that the water heater can be filled with water when the water and electricity are turned off)
Recommended reading
[Balcony electrical appliances] Can electrical appliances be placed on the balcony? Precautions for placing electrical appliances on the balcony
[Washing machine placement ]Washing machine placement Feng Shui pays attention to the hidden mystery of the washing machine?
[Dryer Encyclopedia]Which is the best home dryer Buying skills with a dryer
[Hairdryer Knowledge Encyclopedia] The working principle of hair dryer The harm of hair dryer
[Electric clothes drying rack] Choose manual or electric clothes drying rack to create high-quality and elegant home life
