[Glucose meter blood collection]How to use electronic blood glucose meter blood glucose meter blood collection pen
Blood glucose meter blood collection pen How to use
Unscrew the blue cap on the front of the lancet
Insert the lancet tightly into the lancet holder. Gently twist the protective disk above the lancet until it separates from the lancet. Do not twist the lancet. Screw the cap back on the cap clockwise.
If necessary, adjust the penetration depth setting. Turn the depth adjustment knob, smaller dots represent shallow punctures, and larger dots correspond to deeper punctures. Slide the pop/snap control until it snaps.
Slide the pop/snap control until it snaps. If it is not buckled, the sampler may have been buckled when the lancet was inserted.
Press the release button. Take the ONETOUCH lancet away from your finger. Gently massage your fingers to get a round drop of blood. Do not squeeze the puncture site too much and do not smear the blood. Now it’s time to start a blood test.
Cover the exposed lancet tip before removing the lancet. Place the lancet guard on a hard surface. Push the lancet tip into the protective tray.
Point the lancet tip down and out. Push the release button to ensure that the blood collection device is not buckled. Push the eject/snap control to eject the lancet from the sampler.
Which brand of blood glucose meter is good》》》
How to use the blood glucose meter》》
