[Bluetooth speaker connects to mobile phone] How to connect the bluetooth speaker to the mobile phone? The bluetooth speaker cannot connect to the mobile phone
How to connect a bluetooth speaker to a mobile phone
1. Before use, it is recommended to fully charge the bluetooth speaker. Charging method: Insert the charger plug into the charging socket of the Bluetooth speaker, and then connect the charger to an AC power source or a personal computer. The charging indicator light is on when charging, and the indicator light is off after charging is complete.
2. Turn on the Bluetooth speaker.
3. Turn on the bluetooth function of the mobile phone and find the bluetooth device.
How to connect the bluetooth speaker to the mobile phone
4. Turn on the bluetooth on the mobile phone to find the bluetooth device, there are some in the password manual. Common passwords are 0000 or 1234.
5. When connected, the bluetooth speaker will beep.
6. Next, you can listen to songs, answer the phone, etc.
What to do if the bluetooth speaker can’t connect to the phone
The bluetooth speaker can’t connect to the phone Solution 1:
The first step, Turn on the bluetooth function of the mobile phone and go in to search for the status of the bluetooth headset.
The second step is to make the Bluetooth audio in the power-on state, you need to press and hold the power button of the Bluetooth headset for about 5-6 seconds. Until the indicator light: blue light and red light flash alternately and then release.
The third step, at this time, the Bluetooth speaker and the mobile phone will enter the matching state again. After the Bluetooth speaker is displayed on the phone, click OK to connect.
The fourth step, note that the effective distance between the mobile phone and the Bluetooth speaker is within 10 meters. Some Bluetooth speakers need to enter a password when they are paired: 0000 or 8888.
Solution 2 if the bluetooth speaker cannot be connected to the mobile phone
If it cannot be connected because the bluetooth signal of the speaker cannot be found, you can perform the following steps.
The first step is to open the settings item, turn on Bluetooth, and tick the box that can be searched by other devices in the top row, then you can search for pairing. If you still can’t connect, it means chip comparison. Difference.
In the second step, the specifications of the i-controlled X3mini bluetooth speaker are: CSR4.0 (CSR8615 chip), equipped with NFC function. In the off state, the NFC function can wake up the product and turn it on, and it can be successfully paired Bluetooth; Bluetooth can be successfully paired through NFC when it has been manually turned on.
If the above steps are repeated to no avail, it is basically a problem with the Bluetooth module of the speaker. Electronic products, you have to accept its failure, and it is normal to have many small problems.
