1. Pay attention to safety when installing ceiling fan lights:
1. Ceiling fans should be installed on a high ceiling position, the ground wire may not be installed.
2. The fan blades of the electric fan are important parts, no matter when they are installed, disassembled, scrubbed or used, they must be protected to prevent deformation.
3. The speed control knob of the ceiling fan should be rotated slowly and sequentially, and should not be rotated in the position between the gears, otherwise the ceiling fan will be easily heated and burned.
4. An experienced person must be asked to operate in accordance with the standard when installing and wiring. Before the installation process, check the voltage for this ceiling fan light.
5. Determine the place where the ceiling fan light is installed to ensure that when the fan blade rotates, it will not touch other objects.
6. The screws that fix the ceiling fan must be able to withstand a pulling force of 16 kg, so as to ensure the safe and reliable operation of the ceiling fan light, and all screws and turns should be tightened during the installation process.
7. Do not bend the fork of the fan when balancing the fan blades or cleaning. Warmly remind everyone that the ceiling fan lamp can use incandescent lamps or LED lamps, which are energy-saving and bright enough. Compared with incandescent lamps, general 5W LED lamps can be used for 50W incandescent lamps, which are cheap and have a long service life.
For ceiling fan lights, the fan blades are divided into: retractable and non-retractable. However, the cleaning principle is basically the same. The retractable fan blades must be dragged out and cleaned. Cleaning ceiling fan lights is a high-altitude operation and should pay attention to installation. If necessary, you can ask a professional to clean it.
Second, the cleaning method of ceiling fan lights:
Method 1: Use edible white vinegar to clean, mix about 10 ml of white vinegar with 50 times of water. Soak a rag in white vinegar water, take it out and twist it to dry quickly, then wipe the surface of the ceiling fan light. The lamps cleaned in this way are very smooth and clean, and there is no static electricity, and it is not easy to get dust again.
Method 2: Clean with kerosene. Use a toothbrush dipped in a small amount of kerosene to scrub the dirty parts of the ceiling fan light, which can easily remove the stubborn dirt on the surface of the fan light. It is also possible to clean directly with kerosene. Note: When kerosene is directly cleaned, the fan blades must be removed, smear the part to be cleaned with kerosene, brush with a brush, wait for a while and then use dishwashing liquid to remove the remaining kerosene.
Method 3: Clean with special detergent. After spraying the cleaner on the surface of the ceiling fan light, wait for 1 minute, and then wipe it with a dry cloth.
3. Maintenance of ceiling fan lights
1. When cleaning, try wiping with a dry cloth or a slightly damp cloth. Do not use too much force, so as not to change Shaking due to the balance of the fan blades.
2. It should be set to reverse in winter to achieve the effect of air conditioning. If it is not used for a long time, the fan blade should be removed and placed in a dry and flat place, and a heavy object should be pressed on the fan blade to prevent deformation of the fan blade.
3. Due to the different quality of materials and the change of humidity, the dampness of each fan blade is different, which will cause the problem of different weights. You can paste some small gaskets and other things until the weight is the same. Can.
4. When the ceiling fan makes noise when it is running, you should check whether the screws of each part are loose, and there is a vibration sound caused by the gap at the connection of the accessories; whether the speed governor that does not match the ceiling fan is installed .
Fourth, keep running normally
Pay attention to the daily maintenance of ceiling fan lights. Maintaining its good performance and avoiding the deformation and vibration of the fan blades is beneficial to energy saving to a certain extent.
