In recent years, more and more families have begun to use small home ovens to cook delicious dishes, but many small home ovens will have some glitches after a period of use, so how should the small home ovens be dealt with? ?
The common faults of small household ovens can be handled by themselves in many cases, so today we will talk about the common faults of small household ovens, how to deal with the small faults of small household ovens, and share the small Common faults and solutions of household ovens.
Common failures and solutions of small household ovens:
1. The indicator light is off and does not heat up:
It is a very common small household oven failure that the indicator light does not light up and does not heat up. The solutions are as follows:
a. Confirm whether the power supply panel is normally powered;
b. Confirm whether the circuit components are damaged. If there is damage, contact the maintenance center;
c. Confirm whether the heating has been completed, because the oven will automatically stop after heating to the set time. Work;
d. Confirm whether the timing is correct. Most ovens do not work without setting the timing.
2. The indicator light is on but not heating:
The reason why the electric oven does not heat up when the indicator light is on is mostly due to the following reasons:
a. Check the temperature setting of the oven, if it is because the temperature setting is too low, please reset the temperature;
b. Check whether the heating has reached the setting The phenomenon that the heating control (thermostat) jumps off due to the temperature;
c. After the above two points are ruled out, it is suspected that the heating element is damaged, please contact the service center to replace the heating element.
3, leakage:
One of the common problems of small household ovens is leakage, when leakage occurs, it should be Immediately disconnect the power supply of the electric oven to achieve complete electromechanical separation, and then complete the fault diagnosis and treatment in the following two steps:
a. Check whether the power supply grounding is correct. If the grounding is incorrect, it must be reconnected. Good grounding before use;
b. If the grounding circuit is found to be good, the electric oven must be stopped immediately and the repair center should be contacted for troubleshooting.
4, Odor:
When the electric oven is found to have an odor when it is working, the following three steps should be used to complete the inspection and Treatment:
a. Whether there are uncleaned oil stains and food residues in the electric oven box;
b. Whether the items that are prone to odor are placed in the box when the electric oven is working
c. If there is no problem with the above two points, check whether the circuit part is damaged. If there is any, it must be repaired immediately.
5, timer failure:
Usually, there are two situations in the failure of the timer of the electric oven: one is the timer The running time is inaccurate; the second is that the timer does not return after setting. When encountering a timer failure, everyone should pay attention not to disassemble the box and repair it by yourself, because the timer of the electric oven is a relatively precise controller, and it is difficult to troubleshoot without considerable experience and professional maintenance tools. Therefore, When the timer of the French phase electric oven fails, it is recommended to stop using it and send it to a professional repair center for troubleshooting.
