[Water Dispenser Disinfection]Which method is better for water dispenser disinfection than water dispenser disinfection methods
Water dispenser cleaning method – soaking disinfection method
Immersion disinfection. It uses disinfectant to soak each pipeline of the water dispenser. The active ingredients of the disinfectant are represented by chlorine dioxide and hydrogen peroxide: chlorine dioxide is low in cost, but the residue is not easy to clean; the residue of hydrogen peroxide is easy to clean, but the price is high. When using chlorine dioxide for disinfection, soaking in a solution with a concentration of 50-100mg/L for 5 minutes can achieve the purpose of disinfection; when using hydrogen peroxide for disinfection, the soaking time is the same for 5 minutes, but the concentration is 1.5%. In addition, although formaldehyde, dialdehyde and other aldehyde disinfectants have strong bactericidal ability, they have a strong irritating odor, and cannot circulate and rinse the inner bladder, pipe wall, water distribution pipe and other parts of the water dispenser, so it is difficult to take out the dirt. .
Water dispenser cleaning method – spray cycle disinfection method
The spray cycle disinfection method is an industrial disinfection principle using “high pressure spray” , Disinfectant is sprayed from the water inlet of the water dispenser, and the disinfection water is “circulated” in the water dispenser through high pressure. After the liquid is recovered, there is no need to wash it with water. The cost is comparable to the soaking disinfection method, which has attracted the attention of many water dispenser manufacturers.
Cleaning method of water dispenser-disinfection method by releasing ozone
Disposing the remaining water in the cold water cavity and hot water cavity of the water dispenser by releasing ozone disinfection method When finished, insert the disinfection plug into the water inlet of the water dispenser, connect to the rubber hose of the ozone generator, turn on the power of the ozone generator, and pass the ozone for 15 minutes. Then, open the cold water nozzle, use ozone to sterilize the cold water circulation pipe, close the cold water nozzle after 5 minutes, and then open the hot water nozzle to sterilize the hot water pipe.
The cleaning method of the water dispenser is mainly in the three aspects described above. Different methods are suitable for different users, so when choosing, you can choose according to your needs. Generally, the water dispenser can be done by yourself, but if you want to clean it more thoroughly, you can ask professional staff to help. After they come to the door, they will follow the corresponding steps and appropriate methods to clean. After cleaning, the water will become cleaner, and it will also be of great help to the user’s health.
