[Downlight installation] What is the downlight installation method and what is the appropriate distance for the downlight installation
What is the downlight installation method
1. Open a round hole on the ceiling according to the size of the opening.
2. Pull out the power supply cord and connect it with the lamp power cord. Note that the wiring must be firm and not easy to loosen.
3. Press the two sides of the lamp installation shrapnel with your hands, and press them to the middle to align the installation holes, and push them into the ceiling.
4. Depending on the elasticity of the installed shrapnel, the lamp is positioned on the ceiling, and the test pin turns the cover to feel its strength and tightness.
5. When dismantling the lamp, please turn off the power, hold the lamp socket with your hand, press the cover, and pull down hard.
How much is the installation distance of downlights appropriate?
In fact, such a lighting design cannot be set with a fixed size , the distance of the downlight can generally be arranged between 1m and 2m without problems, or it can be farther. It depends on whether the downlight is used as the main lighting or auxiliary lighting, and whether there are other lighting fixtures in this area, such as the main light, the secondary reflection light belt of the ceiling, etc. If the downlight is only used as auxiliary lighting, it is generally not required that there are too many downlights, too bright, and the ceiling will appear very complicated. The design of the spacing of the downlights will change with the change of the environment. The environmental requirements are different, and the spacing will naturally be different. The specific downlight spacing will be set by the designer according to our needs and the needs of the environment.
