How to use the Epson projector
1. Turn on the Epson projector
Find the remote control, the red button on the remote control is a switch, press it to open Projection, wait for a few seconds, a blue shadow will appear on the screen. At this time, please do not use the controller to do any operation on the projection. If you press the switch again, it will prompt “Whether it is turned off”. Press the red button to confirm, then the projection will be turned off. If you press by mistake and the message “Whether to close” appears, do not perform any operation, wait for 5 seconds, and the prompt window will be closed automatically.
2. Connect the notebook
Connect the Epson projector cable to the VGA plug of the notebook. Generally, when you open the notebook, you can see the notebook desktop on the screen. If it cannot be displayed, press fn+f8 or the combination of crt/lcd to switch.
3. The meeting is over
Press the red button on the projection remote control twice to close the projection; Coiled and placed behind the speakers; press the curtain control up switch to retract the curtain.
Epson Projector Projection Area Adjustment
1. Adjust by the zoom ring
Most Epson projectors use zoom The lens can be adjusted by the zoom ring above the lens, and the size of the projection area can be changed when the zoom ring is toggled left and right.
2. Adjust by the digital zoom function
Press the MENU button of the Epson projector to enter the setting interface; select the signal setting in the setting interface, and then click to open the zoom size; Use the arrow keys to adjust the size of the projector area.
How to turn on the Epson projector
1. The switch is up and the screen is up.
2. The switch is down, and the screen is down
3. The switch is flat, and the screen stops rising or falling
Note: If the screen does not respond when you press the switch, Please check whether the power supply of the switch controller is plugged in properly. The power plug is a white two-pin plug. Epson Projector Products >>
