[Fan light switch] How to connect the ceiling fan switch to the fan light control wiring instructions
How to connect the three-wire ceiling fan light to control the light and the fan separately?
Three-wire ceiling fan light wiring To control the light and the fan separately, the switch is connected in series with the live wire.
Now a live wire is used as the common terminal of the three lamps, and the three switches can be connected in series to the neutral wire of the three lamps.
How to connect the ceiling fan switch?
The motor comes out with three wires, red, blue, and black.
Use a multi-purpose pen to measure the resistance. The two with the largest mutual resistance among the three are ignored first, and the remaining one (usually red) and the other two are measured for resistance respectively. The larger resistance ( Usually blue) connect one end of the capacitor and the other end of the capacitor to the zero line, and the smaller resistance (usually black) is also connected to the zero line.
The governor is usually strung on the live wire.
Theoretically, there is no distinction between positive and negative, and the two terminals can be connected at will.
The ceiling fan switch is live wire. If there is only one line, cut it off and put both ends into the switch.
The live wire is in and the live wire is out. Do not connect the neutral wire, or the incoming and outgoing connections are reversed.
A ceiling fan light switch is a two-way switch or a single-way switch?
Both dual-control switches and single-control ceiling fan lights are possible. For example, if a light needs only one switch to control, we can choose a single-control switch; but sometimes for convenience, such as in the bedroom We hope that the light bulb can be controlled by a switch at the door of the bedroom, or at the head of the bed, so that the switch at the door of the bedroom and the switch at the head of the bed can control the same lamp, etc., so we need to use dual controls.
How to connect the ceiling fan dual control switch?
Two double switches are used, each double switch has three wires represented by A1A2A3, the other one is represented by B1B2B3, A1B1 represents the middle terminal, the order: the live wire is connected to A1, A2 Connect to B2, A3 to B3, B1 to one end of the lamp head, and the other end to the neutral line to form a loop.
How is the ceiling fan light controlled, and how should the wiring be reserved?
The fan has three different control methods: wall control, pull cord, remote control.
These three control methods can control the lights and fans separately, but the wall control and remote control cannot be installed on the same ceiling fan light at the same time.
Most models come with a drawcord control, wall and remote controls are sold separately.
Rope method
There are two ropes on the ceiling fan, one to control the light and the other to control the fan gear. Wiring can be installed.
Only the way of pulling the rope can control the multi-stage switch of the light.
How to wire the ceiling fan light switch?
(It can be installed with ordinary light wires, that is, one fire and one zero).
The advantage is that the fan gear and lamp gear can be adjusted at will; the disadvantage is that it has to be pulled in front of the fan every time.
Wall control method
The wall control is a controller installed on the wall for speed regulation and light control. It is equipped with an 86-switch cassette (home decoration). most commonly used cassette sizes).
The speed control knob and light switch are on the same panel, or the light switch can be installed separately.
Three wires are required for wall control installed on ceiling fan with light.
(One more line is required, that is, two fires and one zero).
The advantage is that it is affordable, convenient and stable, and the ceiling fan or lamp can be turned on when entering the door; Turn it on and off, it cannot be adjusted in multiple gears.
Remote control method
Use the special frequency remote control to adjust the speed and turn on and off the lights, which is convenient for control. The remote control has timing function, and you can set the fan when you sleep at night. Set closing time.
The remote control is to install the receiver directly in the chandelier, and it can be installed without extra wiring.
(You can use ordinary light wires, that is, one fire and one zero).
The advantage is that it can be freely adjusted in a large range of 360 degrees within 10 meters, and has a timer closing function; the disadvantage is that the remote control and the pull rope cannot be used at the same time, and the remote control light switch can only be turned on and off, not multiple gears Adjustable, its stability is not as good as drawcord and wall mount.
Is the ceiling fan light wall control easy to use?
The ceiling fan light wall control is easy to use, the fan and the light are controlled separately, each has a zipper, the middle zipper is for controlling the light, and the side zipper is for adjusting the fan gear. The switching sequence of each gear is: off “high speed” medium speed “low speed, and so on.
The zipper is long enough. The zippers attached to the ceiling fan are all 50cm long, so don’t worry.
The higher-grade ceiling fan lights are more decorative and can also be used as air-conditioning companions to provide flowing air.
However, the lighting effect of many ceiling fan lamps is not ideal. It is not enough to illuminate the whole living room with only one ceiling fan lamp. It is better to cooperate with other light sources.
