1. Floor light box size
The most common form of floor light box is a vertical floor light box. The floor light box placed indoors can be moved at will, while the floor light box decorated outdoors cannot be moved, such as a bus stop, where the floor light box can be seen. Floor light boxes used in different places are different in size and specifications. The base is generally 10 cm, and the height is 120 cm and 150 cm. Nowadays, most of them are about 1 meter, which is similar to the height of the human body, the plane width is 53 cm, and the outer frame is almost 60 cm. The bezel size is approximately 3.5 cm. The size of the single-sided floor light box is 2200*1100*200mm.
Of course, the size of the light box can also be customized according to your own needs.
Second, the price of the floor light box
Most of the time, the frame is black, with double-sided lighting, Built-in LED light source, more energy saving and environmental protection. The base of the indoor floor light box is made of metal material, which can effectively prevent deformation, and the wheels are installed for better movement. The parts and components configured in every detail, from the base wheels to the power technology used in the floor lamp box, have been standardized. Even so, the price of the floor lamp box is still economical. It is understood that the price of the floor light box is up to a thousand yuan, and the lowest is about three or four hundred yuan. And the floor light box of about 700 or 800 yuan is very good.
3. Precautions for installation of floor light boxes
1. According to the position of the attachment, cutting and welding, generally 2.5 × 2.5 angle iron, welding triangle bracket. The light box is placed horizontally, generally 20 cm away from the wall, its arm length is constant, and the arm bracket height is half of the arm length, and the diagonal braces account for 1/3 of them. ?? If the large light box is 1.8×1.2 meters, the arm length is 20 cm away from the wall, and two hard-angle irons are welded. Secure the rear side of the headlight box to prevent it from wobbling. The height should be at least 2/3 of the height of the light box.
2. If the light box is erected, 1.3×60×20, the column can be raised no less than 2/3 of the light box. ?? The erected light box, 1.8×1.2×20, must be welded into a semi-frame light stand. The top and bottom are fixed firmly. ?? There is also a small light box, 1.20 × 0.60 × 0.2 is directly connected to the aluminum plate with aluminum strips. For the installation of the angle iron frame, drill four holes with a diameter of 10 on the bracket, and then place the bracket in the position to be installed. Once the hole is located, drill a diameter 8 hole with a hammer drill.
Declare: The above methods are derived from the program system index or shared by netizens. They are for your reference only and do not represent the research views of this website. sex and authority.
