[Folding sofa bed
] How to install the folding sofa bedFolding sofa bed operation instructions
How to install the folding sofa bed
1. Put the bottom of the sofa upside down;
2. Put the square bottom frame on the bottom of the sofa, and lay the front part of the sofa flat;
3. Put two T-frames into the nests on both sides of the square chassis, the short end is placed in the front nest, and the long end is placed in the back of the nest;
p>4. Tighten the screws;
5. After installing the bottom frame, turn the sofa upside down and install the rectangular movable back on the back T
6. Pull out the square base frame and place the wooden board in the middle of the base frame.
Back Cushion Folding
This type of sofa bed is more convenient to fold, its The design is simple and looks a bit like a solid wood lounge chair or a European-style fabric seat. Take the above picture as an example, such a sofa bed can be changed from a sofa shape to a bed shape by simply turning on the switch on the back of the bracket, then lowering the back into a straight line, and finally folding the sofa cushion over, which is very convenient. To change from the bed state to the sofa state is to turn the seat cushion inward, hold the backrest to a suitable angle, and fix the back support.
Cushion pull-out type
The pull-out type sofa bed is more sophisticated in design and is usually not used. When it comes to sitting on the sofa, half of the bed can be hidden under the cushion of the sofa, which makes it softer and more stable when sitting on the sofa. When you want to turn the sofa bed from a sofa into a soft folding bed, you can pull out the other half hidden underneath, splicing it into a plane (usually hearing a ‘bounce’ sound means it’s ok), adjust the backrest to an appropriate angle. If you want to change it from the bed state to the sofa state, the first thing to do is to press the switch at the junction of the two (that is, the place where the ‘bounce’ sound is made), and then push it to the underside of the sofa cushion to hide Just get up.
All-round foldable
All-round foldable sofa bed with cushion and backrest can be adjusted. This sofa bed can save indoor space very well, and there is also a bed storage design under the seat cushion, which can store sofa pillows. The armrests on both sides of the sofa bed can also be put down, effectively increasing the area of the sofa bed.
Backrest reclining
The folding bed with backrest is relatively simple to operate. It is different from the all-round foldable sofa bed in that, to change the sofa bed from the sofa state to the bed state, you only need to lay the back flat and form a plane with the seat cushion. The specific operation method is to firstly tilt the sofa cushion forward, and when you hear a ‘bounce’ sound, then turn the backrest back and you can put it down.