How to open the safe if I forget the password
One, emergency method one
1. First, you can use the emergency key Force opening, because each safe will be equipped with an emergency key when it is sold, that is, if you forget the password, you can open the safe together with the master key, and then reset the password according to the instructions.
2. Contact the safe seller or the technical department of the manufacturer directly for help. Some safes can reset the password with the original password.
3. If the above methods do not work, go to a regular unlocking company (must be registered with the police) for help.
Second, emergency Method two
Mechanical password
or so The kind that turns the dial; check the original password from the manufacturer according to the factory number;
1. Align the first set of password numbers to the right three times to the reference line
2. Align the second Align the group password number to the left twice to the baseline
3. Align the third group password number to the right once to the baseline
Simply put: right three left two right one
Note:
1. If you see the number once, it will be counted once
2. If the last number of the dial is turned over, you must start over. , cannot turn back.
Electronic password
1. It is recommended to enter the original factory password to try, 1234, 123456 or 168, or 666666 to see if it can be opened.
2. Use the mechanical emergency key to open the safe, and use the reset button in the box (the brand is different, and the button inside the box door may be the button to change the number) to reset the password or directly change the password.
How to reset the safe password
1. Open the safe door with the master key and emergency key, there is a reset button inside, press the safe The locker password will be restored to the original password.
2. Enter the new password and press the # key.
How to open a mechanical safe
1. Generally speaking, safes with three sets of passwords can be opened in the same way as mechanical safes. Just make sure the key and password are there.
2. Suppose the password is 80, 25, 50. Turn the combination dial clockwise, so that the scale value “80” on the dial is aligned with the reference point on the dial, and then continue to turn clockwise three times.
3. After the first step is completed, turn the cipher disk counterclockwise once, and continue to turn counterclockwise to the second set of cipher “25” to match the reference point.
4. On the basis of completing the above two steps, turn the password disk clockwise to make the third group of password “50” and the reference point on the top.
5. After completing the above three steps, the password lock has been turned on. Insert the key into the lock hole and turn it 90° clockwise. At this time, the large lock is also in the open state.
How to open the electronic safe
1. First, make sure the password is correct, the battery voltage is sufficient, use the master key and emergency key to open the door, press to reset key.
2. Enter the new password and press the # key; restore the factory password. #factory password#*new password# can be entered in sequence.
3. When the electronic password system fails, how to open the electronic safe? The top of the emergency power box plug is located in the small hole directly below the panel, open the emergency lock cover in the panel, insert the emergency lock key, turn the emergency key counterclockwise to open the electronic lock, and then use the door lock to open normally. Use the reset button in the box to reset the password or change the password directly.
