1. Cleaning methods for garden lights
1. Cleaning methods for interior lighting
When cleaning garden light bulbs, you must first Turn off the lights, then remove the bulb for a wipe. If cleaning directly on the light fixture, do not clean in a clockwise direction as it may cause the light cap to be over-tightened and cause the cap to peel.
2. Method of cleaning the exterior of the lighting
The exterior of the garden lamp is generally dusty. First, it needs to be cleaned with a damp cloth, and then cleaned with a dry cloth or Dry the newspaper and wipe it again. The force must be gentle, not too forceful.
3. Light pole cleaning method
There are a lot of dirty things on the garden light pole, especially the lower part of the light pole, we can use a dry rag Dip in dish soap and wipe, then wipe again with a damp cloth wrung out of water a few times. Be careful not to drench directly with water to avoid short circuit of wires.
2. Daily maintenance of garden lights
1. Regular inspection and cleaning
Garden lights It is an outdoor lamp, which will accumulate a lot of dust and dirt after being placed outdoors for a long time, which not only affects the aesthetics of the garden light but also may affect the use of the garden light, so we must check and clean the garden light regularly.
2. The garden lights also need maintenance and maintenance
On the basis of demarcating the garden light management area, the maintenance responsibility system at all levels shall be implemented. The management system of people, fixed posts and fixed responsibilities, regular inspections and maintenance, and assessment of problems arising from special personnel, so as to improve the responsibility of the person in charge. Don’t hang items on your garden lights; switching garden lights on and off frequently will greatly shorten their lifespan, so use a light fixture to minimize switching.
3. Strengthen the training of maintenance personnel
With the advancement of urban garden lighting technology and the widespread use of new technologies, maintenance personnel need to continue to learn new Professional maintenance knowledge to meet job demands.
4. Old parts need to be updated in time
After the garden lamp has been used for a long time, it is necessary to replace the aging parts in time, otherwise these Aging parts will affect the overall use effect, and may also affect other normal parts.
