[Home Wall Light]How to install the wall light? Creative wall light breaks the dullness of the home
Where should the home wall light be installed?
1. Bedside: For the wall lamp installed here, it is best to choose the lamp head that can adjust the direction, and the brightness of the lamp should also meet the requirements of reading. The style of the wall lamp should be considered and the bedding Or the curtains have a certain echo, in order to achieve a better decorative effect.
2. In front of the mirror: The wall lamp installed here is generally installed above the bathroom mirror. It is best to choose the lamp head facing down. The style of the lamp can be considered to have a certain echo with the handle of the faucet or bathroom cabinet.
3. Corridor or living room: The wall lamps in these places are generally used as auxiliary light sources. The lighting should be soft, and the installation height should be slightly higher than the eye level. It is best to use some other decorations, such as : An oil painting, a vase decorated with flower arrangements, or a wall frame to display artwork, etc. When choosing a wall lamp, you should pay attention to the color matching with the wall. It is best not to choose the same color as the wall. Using some contrasting color wall lamps will sometimes have a good effect.
Installation height of home wall lamp
It should be slightly above eye level, about 1.8 meters high. The lighting of the wall lamp should not be too large. This is more artistically appealing.
Home Wall Light Shade Selection
The choice of wall light shade should be based on the color of the wall. For white or creamy yellow walls, light green and light blue lampshades should be used; for lake green and sky blue walls, milky white, light yellow and brown lampshades should be used. In this way, a conspicuous wall lamp is adorned on a large area of the same color wall, which can give people a sense of elegance and freshness. The wires connecting the wall lamps should be light-colored, so that it is easy to paint the same color as the wall to keep the wall clean.
Alternatively, you can dig a small groove in the wall that just fits the wire, insert the wire, fill it with lime, and then paint the same color as the wall.
Installation and construction of home wall lamps
Installing wall lamps is a very simple matter, mainly Fixed to the wall. The whole installation process is mainly divided into two steps. The first step is to determine the detailed installation location, and the second step is to install. After the installation is completed, it only needs to be aired, stored, pressed, and cured.
When installing wall lamps, generally use embedded parts or punching and gluing methods to fix the wall lamps on the wall.
Gluing
The best way to install a bedside wall light is through gluing. The main methods of gluing are as follows:
1. Brushing method: Brush the adhesive on the bonding surface with a brush, which is the easiest and most commonly used method.
2. Spraying method: For low-viscosity adhesives, it can be sprayed with a common paint spray gun. For those high viscosity adhesives with short pot life and difficult cleaning, spray guns from Burt from the reinforced plastics industry can be used. The advantages of the spraying method are that the glue is applied evenly and the work efficiency is high;
3. Artesian flow method: using a rain-type automatic device. This method is very suitable for flat plate-shaped parts, with high ergonomics and suitable for mass production. In order to prevent the glue from clogging the nozzle, the glue used must have the proper viscosity and fluidity.
Drying and storage
The duration of drying and storage varies according to the type of adhesive, generally there are the following three method.
1. It does not need to be aired and aged, and it is glued and pressed immediately after gluing. Adhesives that fall into this category include skin glue, bone glue and hot melt.
2. It needs to be aired after gluing, and it is also allowed to be stored. In this category are solvent-based, latex-based and chemically reactive adhesives containing organic solvents.
3. Apply glue on both sides, let it dry to the touch and touch the strands with your fingertips to reach the level of stickiness and non-stickiness), press it immediately after bonding, and do not need to be stored. There are solution-type rubber adhesives that belong to this category.
Pressing
1. Necessity of pressing: Before the adhesive starts to cure, a pressing force must be applied to the bonding surface, at least a Contact pressure to ensure the adhesion between the bonding surfaces;
2. The size of the pressing force: the size of the pressing force is related to factors such as the type of adhesive and the type of the material to be adhered, generally 0.2～ 1.5MPa in a wide range.
3. Precautions for pressing operation: the pressing force is appropriate, the pressure distribution is uniform, the pressing time is sufficient, and the adhered body cannot be deformed by compression (except for special cases).
4. Pressing methods: There are various types of pressing methods. Commonly used bedside wall lamp pressing methods include lever weight pressing, spring clip pressing, multiple heavy objects, and sand bags. Area tightening, air bag cushion, spring cushion, autoclave, nail area tightening, screw clamp compression, plate lamination area tightening, etc.
Curing
Curing is a physical and chemical process in which the adhesive changes from a colloidal state to a solid adhesive layer through solvent evaporation or chemical reaction, and at the same time produces a bonding effect . Curing temperature plays a decisive role in curing speed and curing quality. Even for adhesives that cure at room temperature, it is beneficial to increase the curing temperature (within 100°C).
Lighting taboo
In today’s interior design, “one light in one room” is the most taboo when arranging room lighting, so , Many designers will use chandeliers, ceiling lamps, wall lamps, table lamps, floor lamps, track lamps, spotlights, etc., but as we all know, the more complex it is, the easier it is to make mistakes. Therefore, many so-called “designed” houses now have a big failure that is reflected in too many lights.
When the wall lamp appears in the office, on the one hand, it is necessary to control the quantity, and secondly, it depends on its appearance and the design style of its own products. Is it in harmony with other lamps? See whether it is in harmony with the overall decoration atmosphere.
The effect of wall lights
Wall lights usually appear in several home spaces such as living rooms, bedrooms, and corridors, but it is The effect produced in each space is different. In the living room, the wall lamp has more decorative functions, requiring it to have a concise appearance and a certain design aesthetic. In the bedroom, some people like to install the traditional European style wall lamp similar to the standard room in the hotel. At this time, the wall lamp assumes the function of the main light source in the bedroom, and it is required that its brightness should be appropriate and the lampshade should be clean and beautiful. When appearing in the corridor, the wall lamp is almost the protagonist in this space. It plays the same role as a mural under the spotlight. This kind of wall lamp can be selected according to your aesthetic taste, or choose the European classical iron lamp, Or choose a modern aluminum space wall lamp, or you can choose a bird’s nest-shaped rattan lamp with a natural atmosphere.
