Computerized embroidery machineHow to change patterns
Method 1:
1. First To know how to use computer embroidery when there is a pattern, first, input the data into the machine, adjust the approximate starting position, and empty first to determine whether the position setting is appropriate. If it is appropriate, go back to the origin directly, exit the idling, and click “Direct Embroidery” to start.
2. The pattern selection and pattern replacement must be done in the pattern editor. It is the main program of computer embroidery plate making, it can design, edit and modify patterns, and input the designed patterns to the embroidery disk.
3. The pattern editor must have an auxiliary program, the pattern browser, which is an auxiliary program of the editor and an icon on the desktop. It is dedicated to managing and viewing the designed patterns. It can also perform some simple auxiliary operations, such as formatting the disk, deleting, copying the pattern, converting the pattern file to the embroidery disk, etc.
4. It should be noted that the pattern browser cannot browse the patterns not designed by this series of pattern design programs, and for the patterns of the same series of pattern design programs, the lower version browser cannot browse the higher version. Design patterns, and the higher version can be backward compatible.
5. To open the browser, you must first open the pattern editor; also, the pattern editor of the lower version cannot open the pattern file edited by the higher version, and the high version editor can open the pattern file edited by the lower version. .
6. It should also be noted that the computerized embroidery machine cannot be used directly. It must be converted to *.DST or *.DSB, and the computerized embroidery machine can read it into the memory for embroidery.
Method 2:
1. Release the embroidery preparation first: Embroidery preparation – OK.
2. Press to select pattern: select embroidery pattern – OK.
3. Use the arrow keys or page key to select the pattern you want – OK – OK – OK.
4. Set the starting point (parameter setting-3-OK-OK, remember the middle two values).
5. Press the direction key-left-up to make the embroidery frame exceed the limit, then press clear to clear xy to 0, and add 10 to each value after the value you just remembered is positive.
6. Set the color change.
7. Embroidery preparation – OK, ok.
