How to choose the way the radiator enters and exits the water
One, the connection method of top in and bottom out
1 . The connection method of different sides and diagonals is adopted.
Features: powerful water circulation, the water supply temperature of each group is equal, and the radiator heats evenly. Those who adopt this interface installation method generally need to install a balance angle valve at the outlet of the radiator to facilitate the adjustment of the flow of the heating and ensure good heating. This installation method also has the best heat dissipation effect.
Usage: It is suitable for the heating system with many radiators and long. Generally, the length of radiators is more than 1m, so this connection method can be used.
2. The same-side connection method is used
Features: Similar to the previous method, the water circulation is good and the flow rate is large. However, in this way, the length of the heating pipes is longer, the installation is inconvenient, and it will take up more aesthetics of the home decoration. But compared with the first installation method, its heat dissipation effect is slightly worse.
Usage: It is suitable for radiators with a small number of radiators. The basic radiator should be less than 1 length. Otherwise, if the length is too long, the radiators at the back will have uneven heating and cooling, and the cold area will be too large. Problem, the heating effect is not good.
Second, the connection method of bottom-in and bottom-out
Features: The biggest advantage is good appearance, concealment and will not waste too much radiator Pipe, cost saving, simple and convenient installation. It is also convenient to use exhaust and drainage later. This connection method, if it is more than 1 meter, it is recommended to install a partition inside the radiator to increase the water circulation to ensure the heating effect.
Usage: It is suitable for users of collective heating in the north and other places. If it is an independent self-heating household, it is not recommended to use it. At present, most of the radiators used for this type of installation are steel radiators.
Three, the connection method of bottom-in and bottom-out
Features: One of its major advantages is also good appearance, concealment and does not occupy space, and later maintenance Also very convenient. It is also convenient to use exhaust and drainage later. This connection method, if it is more than 1 meter, it is recommended to install a partition inside the radiator to increase the water circulation to ensure the heating effect.
Usage: It is suitable for users of collective heating in the north and other places. If it is an independent self-heating household, it is not recommended to use it.
The different interface methods of the radiator need to be explained clearly to the radiator personnel before purchasing the radiator, especially the bottom-to-bottom method, and the partition plate should be added during production.
