How to clean a pulsator washing machine
First, prepare a box of washing machine tank cleaner, then take out a bag and pour it directly into the washing machine tub, add water to let The product dissolves, let it sit for an hour, and let it soak in slowly. After an hour, just wash the washing machine normally according to the usual mode of washing clothes, and it will be done. It’s very easy.
Generally, after two years of use of the washing machine, due to the scum of the washing powder containing natural oils and the protein in the clothes, it adheres to the back and corners of the inner tub, and gradually becomes moldy, so it needs to be cleaned regularly with bleach. inner barrel for thorough cleaning. First adjust the water level to a high level. After the water is full, add bleach and stir evenly. After about 20 minutes, the bleach thoroughly cleans the dirt on the back of the inner tub. After dehydration, there is a lot of dirt remaining at the bottom of the inner tub of the washing machine. in order to remove the dirt completely.
Cleaning the washing machine
1. Take the washing machine drain hose and place it on an empty bucket (with a certain height), close the water inlet valve and the front door.
2. Pour the water descaling agent (available in the market) for three kettles into an empty container, prepare it according to the ratio of descaling agent/water=l/2, and stir well.
3. Open the “Detergent Addition Box”, pour the mixed descaling agent solution from the detergent addition box, be careful not to splash on the skin.
4. Press the power switch of the washing machine, set the program to “washing program” (the longest time is selected), and make the washing tub rotate; after the descaling liquid is discharged from the drain pipe into the tub, Then add the discharged descaling liquid from the detergent addition box, and repeat this for many times until the program runs, open the filter to clean the filter screen.
5. After the machine is finished running, open the water inlet valve and return the drain pipe to its original position. Re-select the washing program, make the washing machine run again, and clean the filter screen again after the program is finished. At this point, the descaling and cleaning are completed.
