How to clean an electric iron
1. Use toothpaste
1. After applying a small amount of toothpaste to the dirt, use Wipe vigorously with a clean cotton cloth to remove dirt.
2. Turn on the electric iron, preheat it to about 100℃, cut off the power supply, wipe the dirty surface with a piece of cloth soaked in vinegar for several times, and then wash it with clean water.
3. Turn on the electric iron and preheat it to about 100℃, cut off the power supply, apply a small amount of baking soda to the dirty place, and then wipe it back and forth with a clean cloth, the dirt can be removed.
4. Use a cloth dipped in polishing paste to polish the bottom plate with serious dirt to protect the electroplating layer.
Second, use iron cleaning agent
1. Take out a thick cotton cloth, spread it out, and squeeze iron cleaning agent on it. Note that you should buy the correct cleaning agent by reading the product label.
2. Make sure to turn off the iron, pour out the water in the iron, and then wipe the bottom of the iron with a damp, warm cloth.
3. Preheat the iron. When the soleplate is warm, hold the iron and move it in a circular motion over the thick cotton cloth that has been rolled out.
4. Repeat the circle and scrub until the steam holes on the bottom of the iron are cleaned.
Third, use dishwashing liquid
1. Mix warm water and dishwashing liquid in a bowl, and wipe the bottom panel of the iron with a cotton cloth dipped in the mixture. This gentle scrub works best with Teflon-coated soles and doesn’t easily scratch the coating.
2. After removing the stains, wipe off the residual detergent with a damp and warm cloth.
Four. Use salt and white vinegar
1. Mix salt and vinegar in a 1:1 ratio in a pan, heat to lukewarm, until the salt Turn off the heat when the vinegar is still boiling.
2. Scrub the bottom of the iron with a clean cotton cloth dipped in salt and vinegar juice. When cleaning, wear waterproof gloves for dishwashing to prevent the skin from contacting the salt and vinegar juice.
3. After wiping clean, scrub again with a warm damp cloth until all stains and mixture are removed.
What should I pay attention to when cleaning the electric iron
1. The cleaning of the electric iron should not be carried out until it is completely cooled, and a soft damp cloth can be used to assist in scrubbing.
2. If the clothes are coking and sticking to the bottom plate, do not forcefully scrape them off to avoid damage to the coating. You can use the cuttlefish bone to wipe off the coking adhesions, or you can turn on the electric iron and preheat to 100 ° C, then cut off the power supply, apply a small amount of soda powder or decontamination powder on the coking of the bottom plate, and wipe it back and forth with a clean cotton cloth. Dirt can be removed.
3. After the steam iron is used for a period of time, if the water in the water tank of the steam jet iron is found to be turbid, white vinegar and water can be poured into the water tank, heated for a few minutes, power off, and shaken for cleaning. . After washing and pouring out the vinegar solution, it should be washed several times with clean water.
4. If white powder is found in the steam exhaust hole of the steam iron, use a needle to clear it. After cleaning, be sure to empty the remaining water in the water tank. If you find that it is not clean, you can start the electric iron and use up the excess water.
Declare: The above methods are derived from the program system index or shared by netizens. They are for your reference only and do not represent the research views of this website. sex and authority.
