I. How to clean industrial ceiling fans
Industrial ceiling fans are mainly used in places with complex environments such as production and processing workshops. It is neither healthy nor safe, and it will increase power consumption, so it needs to be cleaned regularly, so how to clean industrial ceiling fans?
1. Remove the fan blades and casing of the large industrial fan with special tools for climbing operations.
2. To clean the disassembled industrial fan components, generally use a clean cotton cloth, plastic foam, satin or other soft scrapers for cleaning. It is very easy to use scrapers, gauze, etc. Cleaning of raw materials that destroy the production surface.
3. After the surface of the parts is completely cleaned and tidy, pay attention to the maintenance of the parts that will not be affected, especially the production and processing surfaces should maintain the original precision.
4. The cleaned parts of large industrial fans should not be assembled immediately. They should be coated with grease and covered with clean moisture-proof paper to prevent dust from falling into them. They should be opened after reassembly.
5. After the dismantled industrial ceiling fan is cleaned, the fixed components at the top of the industrial large fan can be processed, and it can be directly scrubbed with a clean towel and alkaline cleaning solution.
6. After all components are cleaned and dried, re-install the industrial ceiling fan according to the installation method of the industrial large fan, and complete the cleaning work.
Second, how to maintain industrial fans
The maintenance of industrial fans should pay attention to regular cleaning. In addition, pay attention to the following aspects of maintenance :
1. Maintenance of fan blades and motor
According to the dust and oil pollution in the working environment of the fan, the fan should be cleaned and maintained in time, mainly including fan blades Dust, oil on the upper part and oil and dust on the outside of the motor. Regular cleaning and maintenance of the outside of the fan can reduce the failure rate of industrial energy-saving fans during operation and provide a clean and tidy air environment for personnel working in the fan environment.
2. Bearing maintenance
The bearing is the main working part of the industrial fan. If the bearing is blocked, it will increase the energy consumption of the fan, so the daily use process In addition, the bearings of industrial fans should be wiped regularly, and an appropriate amount of lubricating oil should be added to prolong the service life of the bearings.
3. Maintenance of accessories
The maintenance of accessories for industrial fans is mainly to check the working status and wear status of the accessories in time. When the wear is serious, it should be replaced in time , Replace or maintain the worn parts of the industrial fan, loose screws and accessories that are missing during the operation of the equipment in time.
