Exhaust fan cleaning tips
1. Detergent cleaning: This is a more common one. Now the stove is covered with newspapers, and then the exhaust fan is turned on The switch of the fan blade needs to be simply preheated, which is more convenient to clean. Spray detergent on the range hood, and then turn off the fan. After three minutes, use hot water for simple cleaning, and turn on the switch. Let the oil drip into the storage box.
2. Pressure cooker steam flushing: This is a high-temperature removal method, which is mainly completed by the pressure cooker. Add half a pot of cold water to the pressure cooker, boil it, and remove the pressure limiting valve when the steam is continuously removed. Aim the fan blades of the range hood at the steam so that it can be flushed through the heat.
3. Glue removal method: It is mainly a strong sticking method. After drying the brushed fan blade, apply a layer of glue on it. After using it for a period of time, the oil on the fan blade will be It comes with glue, which can then be torn off, which is a more convenient cleaning method.
4. Dishwashing detergent and vinegar soaking: This is mainly used for chemical reactions. The fan blades are removed and soaked in a container of detergent and vinegar. It takes 15 minutes to soak once, and then use A clean cloth will suffice. For range hood cleaning, the fuselage also needs to be cleaned. It should be noted that the temperature of the solution should be kept at about 60 degrees, and the decontamination ability is better. We can adjust it by ourselves to ensure that there will be no reaction to the skin, and it will naturally also affect the range hood. It will not produce corrosion and is a better cleaning method.
5. Soap, baking soda, citric acid: It is also a chemical reaction to clean up. The first thing we have to do is to remove the screw of the exhaust fan, then use a sponge to dip it in soap, then rub the sponge, after generating air bubbles, add baking soda, which becomes an alkaline cleaning agent. In this way, when the exhaust fan is cleaned, the oil will fall off. After wiping everything, we use a clean towel to prepare vinegar or white vinegar for the secondary treatment of dirt, so that the oil is gone, and it is clean and just like new.
Exhaust fan maintenance and use attention
1. It is best not to open and close the ventilation fan frequently, which is the most easily damaged, and the fan blades of the ventilation fan should avoid high temperature and direct sunlight , which can easily lead to the deformation of the fan blades.
2. Be sure to remove the oil stains on the replacement fan, and remove the oil stains on the fan blades, shutters and panels. Do not use corrosive chemical solutions when cleaning, which will easily damage the ventilation fan. Plastic parts and exterior paint.
3. Regularly add lubricating oil to the motor that replaces the fan. When the ventilating fan needs to be reinstalled after cleaning, its fan blade nut must be tightened to prevent the fan blade from rotating and flying out after the power is turned on. ACCIDENT.
4. If your ventilation fan is a filter type, you should clean its filter grid regularly. You must dry it before installing it, otherwise it will affect the filtering effect. Ask a professional to clean and inspect it, so as to prolong its service life.
Notes
1. When installing the ventilation fan, it is very important to choose a good position, especially the position of the fan, which should be kept level with the foundation; and It should be fixed firmly to avoid tilting.
2. When fixing the ventilating fan, it is better to set the position of the adjusting bolt in a place that is easy to operate. If there is a problem in the future use, it is more convenient to disassemble, replace and repair.
3. When installing the ventilation fan bracket, the bracket of the ventilation fan should be in a horizontal state on the ground; if the wall is not firmly fixed, it can be reinforced at the feet of the ventilation fan bracket.
4. After the ventilation fan is completed, check the sealing of the installed wall joint and its surroundings. If the gap is large, it can be sealed with a solar panel or glass glue.
5. The placement of kitchen exhaust fans is very important. To be placed horizontally, the ventilation fan should be placed horizontally. Be careful not to tilt it during use. Check whether the power supply of the socket is consistent with the parameters on the fan nameplate before use.
6. Different kitchen exhaust fans have different cleaning frequencies. The filter-type ventilation fan should also clean the filter grid regularly. If the activated carbon grid must be dried, it will affect the filtering effect.
7. The kitchen exhaust fan needs to be lubricated, and the motor should be lubricated regularly.
8. The kitchen exhaust fan is not resistant to high temperature, so avoid high temperature and sunlight exposure to avoid deformation of the blades.
