How to clean photo printers
1. Automatic cleaning
1. High-end photo printers have automatic cleaning function , First turn on the printer, connect the computer, keep it in normal use state, click the control panel of the computer, the operations of different systems are basically close.
2. Find the button of the printer on the control panel to enter, then you can see the model of the printer you are connected to.
3. Right-click the printer, and items such as printer properties, printer preferences, etc. will appear. You should find the printer preferences and click Preferences.
4. After clicking Preferences, a new window will pop up, click Maintenance, and routine maintenance functions will appear here, including print head alignment, cleaning, and ink cartridge replacement.
5. Click Clean, and the printer will automatically clean. During the cleaning process, the printer will make some friction and rotation sounds, which takes about 60 seconds. After cleaning, just turn off the device.
2. Manual cleaning
1. Use a soft damp cloth to remove dust, smudges, ink stains and paper scraps inside the printer.
2. If there is too much dust, it will lead to poor lubrication of the guide shaft of the carriage. Use a dry absorbent cotton swab to wipe off the dust and oil on the guide shaft, and add lubricating oil with better fluidity.
3. When cleaning the print head, first remove the ink cart, unplug the ink sac, connect the syringe with the cleaning fluid to the ink column of the print head with a hose, inject and withdraw with appropriate pressure until The nozzle sprays a complete thin line vertically. If there is any accumulated residue next to the nozzle hole, it can be removed with a soft rubber product.
How to maintain the photo printer
1. If the photo printer is placed for a long time, the ink cartridge should be removed and sealed. Keep the photo printer and ink cartridges in a place with little dust, well sealed and protected from direct sunlight.
2. Under normal circumstances, do not remove the nozzle from the host and place it alone, especially in high temperature and low humidity conditions. If left for a long time, the water contained in the ink will gradually evaporate, and the dried ink will cause the nozzles to clog. If the nozzle has become clogged, it should be cleaned. If cleaning fails to achieve the purpose, replace with a new nozzle.
3. Avoid hitting the nozzle surface of the photo printer with fingers and tools to prevent damage to the nozzle surface or blockage of the nozzle by debris and oil. Do not blow air to the nozzle, do not put sweat, oil, medicine (alcohol), etc. on the nozzle, which will cause changes in the composition and viscosity of the ink, causing the ink to solidify and block. Do not wipe the nozzle surface with tissue, lens tissue, cloth, etc.
4. Do not turn off the power of the photo printer during use, otherwise it will easily damage the machine. Do not disassemble and install the print head in a live state, and do not touch the electrical contacts of the printing carriage with your hands or other objects.
5. The ink is conductive. If it is spilled on the circuit board of the photo printer, it should be wiped with anhydrous ethanol, and then energized after drying, otherwise the circuit components may be damaged.
Declare: The above methods are derived from the program system index or shared by netizens. They are for your reference only and do not represent the research views of this website. sex and authority.
